Kramer WP-580RXR Active Wall Plate - HDMI over Extended Range HDBaseT Receiver

$570.00
Unit price per

The WP-580RXR is an extended range, HDBaseT twisted pair wall plate receiver for HDMI signals. The WP-580RXR receives an HDBaseT twisted pair signal from the WP-580TXR and converts it back into HDMI signals.

Features:

Max. Data Rate - 10.2Gbps (3.4Gbps per graphic channel).
HDTV Compatible.
HDCP Compliance.
HDBaseTT Technology.
HDMI Support - Deep Color, x.v.ColorT, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD,
CEC.
3D Pass-Through.
EDID PassThru - Passes EDID signals between the source and display.
2K & 4K Support.
System Range - Up to 130m (430ft) normal mode; up to 180m (590ft) Ultra mode (1080p @60Hz @24bpp) when
using BC-DGKat623 cables.
Ultra Range - Up to 180m (590ft) with a resolution of up to 1080p @60Hz at 24 bits per pixel.
Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's
BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may
not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Indicators - Status LEDs for input, output, link and power.
Dimensions - 12.4cm x 3.12cm x 7.9cm (4.88" x 1.29" x 3.12") US; 15.1cm x 2.96cm x 8.6cm (5.95" x 1.17" x 3.39"),
15.1cm x 2.96cm x 8.0cm (5.95" x 1.17" x 3.15") EU (W, D, H).
Wall Plate Size - 2 gang EU/US.

Specifications:

INPUTS: 1 HDBaseT twisted pair RJ-45 connector.
OUTPUTS: 1 HDMI connector.
BANDWIDTH: 10.2Gbps (3.4Gbps per graphic channel).
COMPLIANCE WITH HDMI
STANDARD:
Supports HDMI and HDCP.
POWER CONSUMPTION: 12V DC, 380mA.
DIMENSIONS: 12.4cm x 3.12cm x 7.9cm (4.88" x 1.29" x 3.12") US; 15.1cm x 2.96cm x 8.6cm (5.95" x 1.17"
x 3.39"), 15.1cm x 2.96cm x 8.0cm (5.95" x 1.17" x 3.15") EU (W, D, H).
WEIGHT: 0.6kg (1.4lbs).
ACCESSORIES: Power supply.