Kramer WP-580T Active Wall Plate - HDMI over HDBaseT Twisted Pair Transmitter
The WP-580T is a high-performance,
HDBaseT twisted pair wall plate transmitter
for HDMI signals. The WP-580T inputs
HDMI signals and converts them into an
HDBaseT twisted pair signal that it transmits
to a WP-580R receiver.
Features:
- Max. Data Rate - 10.2Gbps (3.4Gbps per graphic channel).
- HDTV Compatible.
- HDCP Compliance.
- HDBaseTT Technology.
- HDMI Support - Deep Color, x.v.ColorT, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD,
- CEC.
- 3D Pass-Through.
- EDID PassThru - Passes EDID signals between the source and display.
- 2K & 4K Support.
- System Range - Up to 70m (230ft).
- Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's
- BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal
- resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may
- not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
- Indicators - Status LEDs for input, output, link and power.
- Dimensions - 12.4cm x 3.12cm x 7.9cm (4.88" x 1.29" x 3.12") US; 15.1cm x 2.96cm x 8.6cm (5.95" x 1.17" x 3.39"),
- 15.1cm x 2.96cm x 8.0cm (5.95" x 1.17" x 3.15") EU (W, D, H).
- Wall Plate Size - 2 gang EU/US.
Specifications:
- INPUTS: 1 HDMI connector.
- OUTPUTS: 1 HDBaseT twisted pair RJ-45 connector.
- PORTS: 1 IR on a 3.5mm mini jack, 1 RS-232 on a 9-pin D-sub connector.
- BANDWIDTH: 10.2Gbps (3.4Gbps per graphic channel).
- RS-232 BAUD RATE: 115200.
- COMPLIANCE WITH HDMI
- STANDARD:
- Supports HDMI and HDCP.
- POWER CONSUMPTION: 12V DC, 210mA.
- DIMENSIONS: 12.4cm x 3.12cm x 7.9cm (4.88" x 1.29" x 3.12") US; 15.1cm x 2.96cm x 8.6cm (5.95" x 1.17"
- x 3.39"), 15.1cm x 2.96cm x 8.0cm (5.95" x 1.17" x 3.15") EU (W, D, H).
- WEIGHT: 0.6kg (1.4lbs).
- ACCESSORIES: Power supply.
