Clear-Com CP-942 Tempest900 900 MHz 4 Ch. BeltStation

Together with the Tempest2400, the Tempest900 offers another viable and reliable wireless intercom option for specific application needs. The Tempest900 offers much of the same intuitive operation and menu structure, as well as look and feel, of the Tempest2400 system. The difference is that the Tempest900 operates within the 900MHz frequency band. The longer wave lengths and wider symbol width in this band allow signals to break through dense walls and other structural objects more readily, increasing the range for users and reducing potential loss of audio.

The Tempest900 BeltStations, CP-942 (for use with the CM-944 4-channel BaseStation) provides users with full-duplex communications. Similar to Tempest2400 BeltStation models, the Tempest900 BeltStations are designed with a comfortable and rugged casing for long-term durability, can operate in either Normal or Shared Mode, and with flexible battery options. The Tempest900 BeltStations use iSelect on-command roaming technology, which allows a user to easily change association with another Accu-Synced BaseStation location in a few seconds.

The CP-942 BeltStation (4-channel audio) is capable of true dual talk/listen functionality, allowing each user to simultaneously monitor and/or talk on two of the four channels (A or B and C or D).

• RF Frequency: 902 to 928 MHz
• RF Scheme: FHSS with TDMA
• Effective Radiated Power: 250mW using 2dBi antenna
• Receiver Sensitivity: -100 dBm for 10-5 BER
• Radio Certification: FCC Part 15, Canadian RSS-210, license free
• Transmission Range: Up to 1,000ft (305m); 500 - 900ft (150 - 275m) typical
• Audio Dynamic Range: >94dB
• Audio Frequency Response: 300Hz - 3.8KHz with proprietary audio voice shaping
• System Latency: Less than 50ms direct

• Intercom Audio Channels: 4
• Simultaneous Listen Paths: True Dual Listen
• Headset Connector: 4-pin male XLR
• MicrophoneType: Dynamic or Electret, Auto-Selected
• LCD Display: 102 x 80 pixels
• Antenna Internal: +2 dBi patch
• Charger Input: 100-240V, 0.3A, 50-60Hz
• Charger Output: 5V, 1.25A
• Battery Charging: via mini USB connector using supplied charger
• Battery Life, Rechargeable Lithium-Polymer: Up to 8+ hours
• Charge Time, Rechargeable Lithium-Polymer: 2 3/4 hours in BeltStation; 2 1/2 hours in charger (from empty)
• Optional Power: 3 Standard AA alkaline cells
• Battery Life, Alkaline: Approximately 3 hours

• -4o - 122o F (-20o - 50o C)

• 4.0 in W x 6.1 in H x 1.75 in D
• (102 mm x 156 mm x 44.5 mm)