Aviom A-16II 16-Channel Stereo Mixer w/Fully Adjustable Pan

Aviom A-16II 16-Channel Personal Mixer

The A-16II allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.

Stereo output for wired or wireless
The stereo output from the A-16II can be used to drive wired or wireless in-the-ear monitors, headphones, powered floor wedges, an amplifier, or spot monitors.

The A-16II Personal Mixer is fully compatible with all Pro16 Series products, including Aviom's digital interface card for Yamaha digital mixing consoles. Support for Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers including Digidesign, Soundcraft, Innovason, etc. Look for the A-Net Active logo.

Daisy-chain and power
Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable. As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices, and there is no limit to the number of mixers in a system.

Aviom A-16II Features:

• 16-channel stereo mixer with fully adjustable pan per channel
• Sixteen Preset locations for storing custom mixes
• Channel solo, mute, and group functions
• Global trim for reducing all channel volumes
• Intuitive interface with no menus or screens to navigate
• Mounts easily on a mic stand with the optional MT-1 Mic Stand Mount

Aviom A-16II Specifications:

• Audio Output: 1/4-inch TRS stereo, headphone or line level
• Line/Headphone TRS Output: Tip: Audio Left; Ring: Audio Right;Sleeve: Ground Auto-detects mono plugs
• A-Net Input/Output: 1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector)
• Digital to Analog Conversion Bit Depth: 24 bit
• Signal to Noise Ratio: (Referenced to 0dB) -103dB
• Latency: <0.880 msec (measured from analog input to analog output)
• Pro16 A-Net: Uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices
• Tone Controls:
  Treble +/-12dB at 9kHz shelving
  Bass +/-12dB at 160Hz shelving
• Maximum Levels (RMS): Line/Headphone outs: 1.0 watt at 100 ohms
• Impedance: Line/Headphone outs: 32 ohms
• Power Supply: External, DC, universal switching type
  Input Voltage: 100-240 volts, 50/60Hz, 30VA
  Output Voltage: 18-24 VDC, 0.5 amp
  Plug Size: 2 mm
• Dimensions: 10.75" (273 mm) wide x 5.6" (142.2 mm) deep; 2.25" (57.5 mm) high
• Weight: 3.4 lbs. (1.54 kg)
• Options:
  MT-1 Mic Stand Mount (uses 6-32 1/4-inch screws)
  EB-1 Extension Bracket
  MT-X Expansion Box (requires MT-1)