Belden 6301FE 18 AWG 3-Conductor Stranded Plenum Security and Commercial Audio Cable 1000FT
18 AWG bare copper conductors, Flamarrest insulation, conductors cabled, Overall Beldfoil tape shield (foil side out) and drain wire,Flamarrest jacket with ripcord, sequential footage marking every two feet.
-
SUITABLE APPLICATIONS:
- Suitable Applications Security Systems, Intercom/PA Systems, Sound/Audio Systems,
- Power Limited
- Controls
- PHYSICAL CHARACTERISTICS:
- CONDUCTOR:
- Number of Conductors 3
- Total Number of Conductors 3
- AWG 18
- Stranding 7x26
- Conductor Material BC - Bare Copper
- INSULATION:
- Insulation Material Trade Name Flamarrestr
- Insulation Material LS PVC - Low Smoke
- Polyvinylchlorid
- Nom. Insulation Wall Thickness .009 in.
- OUTER SHIELD:
- Outer Shield Material Trade Name Beldfoil
- Outer Shield Type Tape
- Outer Shield Material Aluminum Foil-Polyester Tape w/Shorting Fold
- Outer Shield %Coverage 100 %
- Outer Shield Drain Wire AWG 20
- Outer Shield Drain Wire Stranding 7x28
- Outer Shield Drain Wire Conductor Material TC - Tinned Copper
- OUTER JACKET:
- 6301FE Non-Paired - Commercial Audio Systems
- Outer Jacket Material Trade Name Flamarrest
- Outer Jacket Material LS PVC - Low Smoke
- Polyvinyl Chloride
- Outer Jacket Nominal Wall Thickness .015 in.
- Outer Jacket Ripcord Yes
- OVERALL NOMINAL DIAMETER:
- Overall Nominal Diameter .172 in.
- MECHANICAL CHARACTERISTICS:
- Operating Temperature Range 0DegreesC To +75Degrees
- UL Temperature Rating 75DegreesC
- Bulk Cable Weight 28.1 lbs/1000 ft.
- Max. Recommended Pulling Tension 81.2 lbs.
- Min. Bend Radius (Install) 1.75 in.
- APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE:
- APPLICABLE STANDARDS:
- NEC/(UL) Specification CMP
- NEC Articles 800
- CEC/C(UL) Specification CMP
- EU CE Mark (Y/N) Yes
- EU RoHS Compliant (Y/N) Yes
- EU RoHS Compliance Date (mm/dd/yyyy): 04/01/2005
- FLAME TEST:
- UL Flame Test NFPA 262
- C(UL) Flame Test FT6
- PLENUM/NON-PLENUM:
- Plenum (Y/N) Y
- Non-Plenum Number 5301FE
- ELECTRICAL CHARACTERISTICS:
- Nom. Capacitance Conductor to Conductor @ 1 KHz 70 pF/ft
- Nom. Cap. Cond. to Other Cond. & Shield @ 1 KHz 126 pF/ft
- Nom. Conductor DC Resistance @ 20 Deg. C 6.4 Ohms/1000 ft
- Nominal Outer Shield DC Resistance @ 20 Deg. C 7.6 Ohms/1000 ft
- Max. Operating Voltage - UL 300 V RMS
- Max. Recommended Current 5 Amps per conductor @ 25DegreesC
