Ashly nX752 Network Audio Power Amplifier with Ethernet - 4-Channel x 75 Watts

$1,340.00
Unit price per

Introducing the Ashly series of nX, nXe, or nXp power amplifiers. These products use state of the art, light weight, high power, high efficiency switching technology developed through years of design and field testing. nX amplifiers are available in three series, designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers as well as schools, store fronts,and worship spaces.

Available in three amplifier series, NX offers 2 or 4-channel models as NX (base model series), NXE (networkable), or NXP (networkable + DSP).

Class-D Switching Amplifier Technology.
NX features a universal switch-mode power supply with Power Factor Correction (PFC) that operates from 70VAC to 270VAC.

Multi-Mode Operation.
Selectable Outputs allow you to choose the desired output mode on each channel. Set the DIP-switch configuration for Low Impedance (2, 4, and 8 Ohm), or 25V, 70V, or 100V Constant Voltage and you?re set to go.

Energy Efficiency.
NX has power-saving Ashly EMS™ (Energy Management System) which provides an automatic sleep-mode drawing less than 1 Watt (defeatable).

Please Note: All Ashly nX, nXe & nXp amps include the appropriate power cable that corresponds with the amps power connector.

Features:

Selectable 80Hz 2nd-order Hi-pass filter, limiter, and input gain per channel
Remote DC level control per channel
Extensive protection circuitry, continuously variable cooling fan
Euroblock input connectors
Euroblock loudspeaker connectors
Detachable AC mains line-cord connector
Safety/Compliance: cTUVus (pending), CE, FCC, RoHS

Specifications:

Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
Damping Factor: >250 (8 Ohm load <1kHz)
Input High Pass Filter: 80Hz 2nd order
Distortion (SMPTE, typical): <0.5%
Distortion (THD-N, typical): <0.5% (8 Ohms, 10dB below rated power, 20Hz?20kHz)
Channel Separation: -75dB (dB from full output, 1kHz)
Signal-to-Noise (unweighted) 20Hz-20kHz, [email protected]: >99dB (all 150x models), >96dB (all 75x models)
Frequency Response: 20Hz-20kHz, +/-0.05dB
Balanced Input Connector: Euroblock 3.5mm
Input Impedance: 10k Ohms
Maximum Input Level: +21dBu
Speaker Output Connector: Euroblock 7.62mm
Remote DC Level Control: Euroblock 3.5mm ? Gnd, CV, V+ per input
Attenuators (per channel): Rear panel, Fully off = Mute
Amplifier Protection: Shorted output power limiting, over-temperature, DC-output, power-supply fault, mains-fuses & inrush-current limiting
Cooling: Continuously variable temperature controlled fan
Environmental:32?F-120?F, (0?C-49?C) non-condensing
Unit Dimensions: 19?W x 1.75?H x 14.54?D (483mm x 45mm x 369mm)
Unit Weight: 1504/754 12.1lbs (5.5kg), 1502/752 11.3lbs (5.1kg)
Power Requirements (@ 50/60Hz): Nominal Voltage Input: 120VAC ? 240VAC, Operating Range: 70VAC ? 270VAC
Power Cable Connector Requirements: Detachable Nema 5-15 for USA (cable included)

Warranty:

5 Years