Cables to Go 29329 Wireless A/V for HDMI Devices - B-Stock (Used & No Packaging)

$180.39
Unit price per

Always start a meeting or class on time with the Wireless A/V for HDMI devices kit. This plug and play system allows A/V signals from a laptop, tablet, or Blu-ray player to wirelessly connect to an HDMI projector or HDTV located up to 100 feet away.

Straightforward install
There is no need for cables to be run under the floor, through the ceiling, or up a wall. Mount the receiver near the display and the transmitter near the presenter, then make the connections for HDMI and power on both the transmitter and receiver. This do-it-yourself solution includes all the components required for the setup and does not require an experienced A/V installer. Just plug an HDMI cable into your laptop from the transmitter, and you are ready to present. This kit offers true plug and play operation, allowing any presenter to step up and start a meeting with no lost time. There is no software to install or update, so there is no need to request permissions from IT or wait for drivers to download.

Effortless huddle space connectivity
Just bring your own device to the huddle space and plug in. This simple, one connection solution allows for quick transition from one user to another - encouraging productivity, inspiration, and teamwork while presenting ideas. Any room can be retrofitted to be a huddle space, as the secure wireless transmission of A/V signal does not require new cables or existing cable infrastructure.

De-cluttered conference room
Set up a conference room without limitations using this wireless system. The display does not have to be limited to where wire runs have been located. Place the display anywhere within 100 feet of the transmitter to achieve the optimal setup for any conference room.

Trouble free classroom setup
Setting up A/V equipment in a classroom often requires running cables in wall or plenum space, this type of install requires specially rated cables and professional installation. With the Wireless AV for HDMI solution there is no need to run these costly wires. The straightforward installation takes almost no time to setup and the simplified operation ensures all staff members can use it without training.

Note: The transmitter and receiver do not require line-of-sight to function. However to achieve the 100ft maximum range, reduce or eliminate the number of obstacles between the transmitter and receiver.

Features:

Wirelessly transmit HDMI signal up to 100ft
Supports up to 1080p resolution
Plug and Play - no driver required

Specifications:

WiFi Specifications
WiFi Standard: 1T2R (1x2) - (IEEE 802.11n WLAN
Frequency Range: 2.4GHz / 5GHz
Wifi Security Encryption: Crypto engine for HDCP 2.x and DTCP-IP
Channel Bandwidth: 20MHz / 40MHz (5G only)
RF Power: Output-10dBm max / Receive level-10dBm min
Distance: Max-30m (100ft)
Normal: 10-15ft
Transmission Delay: Max 0.5 sec Latency
Antenna Diversity: Single Antenna for WiFi
Electrical Specifications
Media Processor: H.264 compressing
Video Format: MPEG-2/H.264/VC-1/AVS/MPEG4
Audio Format: MP1/2/3 / AC3 / AAC LC / HE-AAC
Supported Resolutions: 480p (60Hz), 576p (50Hz), 720p (50/60Hz), 1080p (50/60Hz)
Refresh Rate: 60Hz
Wireless: Wireless Display WiDi
Transmitter Physical Specifications
Connections: HDMI Type A 19 pin Female, Micro USB-B Female
Dimensions: 3.3 x 0.5 x 3.35 in
Receiver Physical Specifications
Connections: HDMI Type A 19 pin Female, Micro USB-B Female
Dimensions: 3.3 x 0.59 x 2.05 in

Item Includes:

Transmitter unit
Receiver unit
DC 5V / 1A power adapter
USB power cable
USB Y type power cable
HDMI cable x2
Double sided tape
User manual

Warranty:

3 Years