ClearCom BS410 Base Station for DX410 Wireless System

The BS410 is the base station for the DX410 wireless system, supporting up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. The system operates in the 2.4GHz frequency band and features high quality 7kHz wideband audio. The BS410 allows the option for audio bridging by combining 2-wire and 4-wire audio together on A or B channels.

Operation
The BS410 is a 1RU 2-channel base station with local headset, 2- and 4-wire audio connections, auxiliary in out, and assignable relays. 2-wire connections can be set to RTS or Clear-Com and have auto-nulling. The built in 2.4GHz transceiver transmits RF via two dipole antennas with reverse TNC connectors.

Audio Bridging
The BS410 allows the option for combining 2-wire and 4-wire audio together on A or B channels. When daisy-chaining multiple bases together, users are able to bridge a 4-wire, allowing the use of 4-wire out to send the audio to a mixer, matrix or other audio source.

Features:

• Two-channels
• 7kHz wideband audio
• 2-wire and 4-wire bridging
• 2-wire auto-nulling
• Lost packet concealment
• Upgraded radio
• Supports up to 15 beltpacks and/or wireless headsets

Specifications:

• Channels: 2 audio channels
• Capacity: Up to 15 BP410 and/or WH410 per base station
• Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex.
• Radio Frequency Range: 2400 - 2483.5 MHz
• Audio Frequency: 200 Hz - 7kHz
• 4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire
• 2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200 Ohms, level adjustable, null adjustable to 50dB attenuation, typical
• Aux Input: XLR-3F with +? (6.35mm) combo jack, 600 Ohms balanced, level adjustable
• Aux Output: XLR-3M, 600 Ohms balanced, level adjustable
• Headset Connector: 4-pin mini-DIN, Electret microphone
• Headset Output: 200mW into 32 Ohms
• Antenna Type: External +-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity
• System Distortion: <2%
• Communication Security: 64-bit encryption, dual-slot diversity
  
  Transmitter
• Type: Frequency Hopping, Spread Spectrum (FHSS)
• Transmit Power: 100mW burst
• Modulation Type: Gaussian filtered FSK, TDMA
• Frequency Stability: 13 ppm
• Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature
  
  Receiver
• Type: Frequency Hopping, Spread Spectrum (FHSS)
• RF Sensitivity:
• Frequency Stability: 13 ppm
• Distortion: <2%
• Power Requirements: 100 - 240 VAC, 50 - 60 Hz or 12 - 14 VDC
• Temperature: +32°F - +122°F (0°C - +50°C)
• Dimensions: 1.75 x 19.0 x 17.13 in; (44 x 483 x 435 mm) (HxWxD)
• Weight: 9 lbs (4.1 kg)