Earthworks FW430/HC FlexWand Hypercardioid 4 ft model - 30Hz to 30kHz

$1,699.00
Unit price per

4.7 foot Hypercardioid microphone, boom and stand in a single unit
The FlexWand is a combination of a 30kHz High Definition Microphone and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 4.7 feet and as low as 10 inches from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don?t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand, position it and plug the mic cable into the base.

Features:

Frequency Response: 30Hz to 30kHz ?2dB at 6 inches (15cm)
Polar Pattern: Cardioid or Hypercardioid
Sensitivity: 10mV/Pa (-40dBV/Pa)
Power Requirements: 48V Phantom, 10mA
Max Acoustic Input: 145dB SPL
Output: XLR (pin 2+)
Output Impedance: 100?, balanced (50? ea. pin 2 & 3)
Min Output Load: 600? between pins 2 & 3
Noise: 22dB SPL equivalent (A weighted)
Positioning Range: From 1.5 ft. to 7 ft. above floor level
Gooseneck: Rigid center with nominal 2.5? to 3? flex on both ends
Dimensions: Stand 4?7? (140cm); Base 12? (30.5cm) in diameter, 1.1? (2.7cm) high
Weight: Stand 2 lbs (.9kg); Cast iron base 12.6 lbs (5.7kg)

Specifications:

SRW3 -Foam Windscreen for FlexWands & SR25LP1530 - LevelPad switchable -15 or -30dbFWTCB - Tripod base for all FlexWand modelsFWCIB - Cast Iron base for all FlexWand modelsFWEXT-2 Two foot extensionFWEXT-3 Three foot extension

Includes:

4.7 foot Hypercardioid microphone, boom and stand in a single unit
The FlexWand is a combination of a 30kHz High Definition Microphone and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 4.7 feet and as low as 10 inches from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don?t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand, position it and plug the mic cable into the base.