ESE Dual 1 X 4 Audio/Video DA With 5 Black Burst Sync Outputs

$900.00
Unit price per

The ES-2940 is a single rack mounted unit which contains two Audio Distribution Amplifiers,two Video Distribution Amplifiers and a five output RS-170A Black Burst Sync Generator(BBSG). The unit is designed to meet the requirements of systems which must interfacewith, distribute and synchronize video and audio signals.

Each of the two 1 x 4 Video DA's provide a loop-thru input and four isolated outputs. Screwdriver adjustableGain and EQ controls are accessible on the front panel, all inputs and outputs are provided on rear mounted BNC connectors. Both 1 x 4 Audio DA's accept one balanced (or unbalanced) audio signal and produce four identical copies. Each of the totally isolated outputs has its own front panel-mounted Gain control (an adjustable,internally mounted input attenuator is also provided).The audio inputs and outputs are accessible on rearmounted terminal blocks. If unbalanced outputs are desired, then each of the 1 x 4 Audio DistributionAmplifiers can provide up to eight separate and isolated feeds. The BBSG provides a convenient source of composite black burst for pre-blacking video tape or for general synchronization purposes. The output signal consists of sync, blanking, reference black setup level and colorburst which is SCH phased. The five RS-170A outputs are provided on rear mounted BNC connectors.

Features:

Two 1x4 Video Distribution Amplifiers with looping inputs
Two 1x4 Audio Distribution Amplifiers
A five-output RS-170A Video Blackburst Generator
BNC connectors for Video
Terminal blocks for Audio
Isolated outputs
Video Gain & High-frequency Equalization controls
Audio Gain controls (one for each output)
Single Rack unit
220-240 VAC (110-120 VAC is standard) & UL options available
Video Gain & EQ Controls
Audio Gain Controls
Five RS-170A Black Burst/Sync Outputs
Rack Mount Enclosure
Two 1 X 4 Video DA's
Two 1 X 4 Audio DA's
Accepts Balanced or Unbalanced Audio
Broadcast Quality Audio & Video
Options Available: Black(1), J, P(1), UL W(1)

Options:

(Black) Black Anodized Front Panel-option available when standard panel is clear anodized
List: $15.00
© Crystal Time Base (2-3 seconds week accuracy)
List: $60.00
(D) Remote Control via 6 ft Cable, Connector, Switch Plate
List: (extra cable at $2.00/ft) $65.00
(DC) 12 - 35 VDC Operation (No AC Power Input is supplied with Option "DC")
List: $250.00
(ESE) ESE Serial Time Code Output
List: $30.00
(EQ) Front panel accessible Equalization trimmer when cable is to exceed 100' (400' max.)
List: 25.00
(J) 220 Volt / 50 Hz Operation (Standard is 117 Volt / 60 Hz)
List: (+ option "UL" = $125.00) $30.00
(L2) 2 Additional Video Loop Thru's
List: $150.00
(L4) 4 Additional Video Loop Thru's
List: $300.00
(MT) Precision Multi-turn Potentiometers for Gain Control (Standard with ES-246/XLR) see above
(P) 19" Rack Mount
List: $55.00
(P2) 19" Rack Mount mounts two (2) units (with P2 Option) side-by-side (Consult ESE factory)
List: $75.00
® Rear-mounted connector for Remote Control (standard on many units)
List: $55.00
(SV) S-VHS connectors are provided instead of standard BNC connectors
List: $75.00
(Sync) Composite Sync Output; 2 vpp into 75.
List: $30.00
(Tone) Continuous 1KHz Tone at 0db for Synching Audio with Video
List: $55.00
(UL) "UL" Approved Wall Mount Power Supply
List: (+ option "J" = $125.00) $60.00
(W) 3 Wire Line Cord
List: $16.00
(XLR) XLR Connectors instead of standard Terminal Block see above
NOTES:
1) Included at no charge
2) Includes Windows control software
3) With option 'SV' only one of the following options may be specified 'L2', 'L4', or 'P2'