ESE ES-216 Audio Level Indicator

$69.00
Unit price per

TheES-216 is an in-line audio level indicator which provides a purely digital representation of an audio signal's loudness. The unit features ten LED's (six Green, one Yellow and three Red) that display levels of -20, -10, -7, -5, -3, -1, 0, +1, +2, and +3 db. One LED is lit at a time and simulates the "flying wand" effect of an analog meter. Units are shipped in Peak mode unless otherwise specified (VU response may be specified optionally). The plastic bezel is designed for panel / console mounting. Four spring fingers hold the unit in the cutout opening. Connections are made via four spade lugs on the PC board. The unit measures 3"W x 1.4"H x 1.5"D

Features:

0 LED Levels
Peak Detecting (VU optional)
Balanced or Unbalanced input
Calibration adjustment
10-24 VDC Power Input
Various Options available: Black, P

Options List

(10nS) 10nS Accuracy: The accuracy of the unit is improved to 10nS.
List: $300
(Black)Black Anodized Front panel-option availabel when standard panel is clear anodized
List: $15
© Crystal Time Base (2-3 seconds per week accuracy)
List: $60
(ESE) ESE Serial Time Code Output
List: $30
(EXT{1,5 or10}) External Input of either 1 MHz, 5 MHz, or 10 MHz (for use with "in-house" Standard)
List: $70
(IRIG) IRIG-B or IRIG-E Time Code may be specified (not available with SMPTE/EBU)
List: $300
(NPR) NPR (National Public Radio) Time Code INput (excluxive) with ESE Time Code Output
List: $135
NTP NTP Client Display will synchronize exclusively with an NTP server
List: $120
(6-Digit) Six-Digit Display: A 6-Digit (Hr, Min & Sec) Front Panel Mounted Display (.55" LED) is provided. Option 'P' is required.
List: $200
(9-Digit) Nine-Digit Display: A 9-Digit (Days, Hr, Min & Sec) Front Panel Mounted Display (.55" LED) is provided. Option 'P' is required.
List: $300
(Ant) GPS Antenna: High Performance GPS Antenna for harsh RF Environments.
List: $195
(B) Parallel BCD Output: CMOS compatible, 5-volt logic in parallel four-line format. Specify the ES-169B.
List: $300
BBU Battery Back-Up: An internal Gel-Cell battery is provided capable of maintaining the unit's microprocessor for up to a 4-hour power outage.
List: $130
(TZ) Time Zone Offset via internal DIP Switch
List: $30
(Q) 9" x 3 1/2" Front Panel for Console Mount Applications (Case is 8" Deep)
List: $80
(RS) RS232C ASCII Computer Interface (RS422A available on a custom basis)
List: $50
(UL) "UL" Approve Wall Mount Power Supply
List: $60
(V) DC Power (12 VDC)
List: $30
(W) 3-Wire Line Cord (2-Wire Line Cord is Standard on many units)
List: $16
(Wall) Wall Mount Enclosure replaces standard enclosure
List: $80
(DC) DC Operation: Requires the unit to be powered from a DC source exclusively, typically +12 to +35 VDC.
List: $250
(SMPTE/EBU)SMPTE or EBU Time Code outputs: SMPTE or EBU Time Code outputs may be specified (not available with IRIG).
List: $300
(HR) Relay Closure: Option "HR" provides a user programmable relay contact closure. The standard contact closure occurs on the Hour and Half Hour. If contact closures at other times are desired, the user can program up to four relay closures using the PC Software, which can be downloaded from the ESE web site. The reed relay is rated at 10 watts maximum resistive load (500 mA switching current) and is intended for control applications only. The relay contacts are accessible on the DB-9 connector.
List: $50
(J) 220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
List: $30
(K) provides a 10 MHz output and a 1 KHz output. Option '10ns' is required if option 'K' is specified. UL "UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
List: $300
NOTES:
1) Included at no charge
2) Option 'P' is required
3) EBU and/or PAL may also be specified
4) Specify the ES-169B
5) Not available with option "Wall"
6) ESE time code output option may be specified if ordering 'NTP' option
7) Specifying option 'NTP' for the ES-185U or the ES-911/GPS provides an NTP server, option price is $400
8) '10ns' option must be specified

Custom "DST" available @ 150 on any Master Clock with DST feature
NOTE: PLEASE CALL BEFORE ORDERING FOR CUSTOMIZATION!! THANK YOU