Kramer TP-582T 2x1 HDMI/Bidirectional RS-232/Ethernet & IR over HDBaseT Switcher

The TP-582T is a high-quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS-232 and IR signals. The TP-582T selects one of two HDMI inputs, and converts it with the Ethernet 100BaseT, RS-232 and IR input signals to an HDBaseT twisted pair signal. The TP-582R converts the HDBaseT twisted pair signal back to Ethernet 100BaseT, RS-232, IR and two HDMI outputs, and de-embeds the audio to S/PDIF and TOSLINK audio outputs.

Features:

• Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).
• HDBaseT Technology.
• HDTV Compatible.
• HDCP Compliance.
• HDMI Support - Deep Color, x.v.ColorT, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC.
• 3D Pass-Through.
• EDID PassThru - Passes EDID signals between the source and display.
• Bidirectional RS-232 Interface - Commands and data can flow in both directions via the RS-232 interface, allowing status requests and control of the destination unit.
• Ethernet Interface - Passes 100BaseT.
• System Range - Up to 100m (330ft).
• Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BCP-DGKat724 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
• Control - Front panel and contact closure switching.
• Indicators - Status LEDs for input selection, output, link and power.
• Compact MegaTOOLSr - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B universal rack adapter.

Specifications:

• INPUTS: 2 HDMI connectors, 1 IR on a 3.5mm mini jack, 1 Ethernet 100BaseT on an RJ-45 connector, 1 RS-232 on a 9-pin D-sub connector, 1 remote contact closure on a terminal block connector.
  OUTPUT:1 HDBaseT RJ-45 connector.
  MAX. DATA RATE: 6.75Gbps (2.25Gbps per graphic channel).
  COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP.
  POWER CONSUMPTION: 5V DC, 800mA.
  DIMENSIONS: 18.8cm x 11.4cm x 2.4cm (7.4" x 4.5" x 1.0") W, D, H.
  WEIGHT: 0.6kg (1.4lbs).
  ACCESSORIES: Power supply.