Kramer WP-580TXR Active Wall Plate - HDMI Extended Range HDBaseT Transmitter

$570.00
Unit price per

The WP-580TXR is an extended range,
HDBaseT twisted pair wall plate transmitter
for HDMI signals. The WP-580TXR inputs
HDMI signals and converts them into an
HDBaseT twisted pair signal that it transmits
to a WP-580RXR receiver.

Features:

Max. Data Rate - 10.2Gbps (3.4Gbps per graphic channel)
HDTV Compatible.
HDCP Compliance.
HDBaseTT Technology.
HDMI Support - Deep Color, x.v.ColorT, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD,
CEC.
3D Pass-Through.
EDID PassThru - Passes EDID signals between the source and display.
2K & 4K Support.
System Range - Up to 130m (430ft) normal mode; up to 180m (590ft) Ultra mode (1080p @60Hz @24bpp) when
using BC-DGKat623 cables.
Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's
BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal
resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may
not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Indicators - Status LEDs for input, output, link and power.
Dimensions - 12.4cm x 3.12cm x 7.9cm (4.88" x 1.29" x 3.12") US; 15.1cm x 2.96cm x 8.6cm (5.95" x 1.17" x 3.39"),
15.1cm x 2.96cm x 8.0cm (5.95" x 1.17" x 3.15") EU (W, D, H).
Wall Plate Size - 2 gang EU/US

Specifications:

INPUTS: 1 HDMI connector.
OUTPUTS: 1 HDBaseT twisted pair RJ-45 connector.
BANDWIDTH: 10.2Gbps (3.4Gbps per graphic channel)
COMPLIANCE WITH HDMI
STANDARD:
Supports HDMI and HDCP.
POWER CONSUMPTION: 12V DC, 210mA.
DIMENSIONS: 12.4cm x 3.12cm x 7.9cm (4.88" x 1.29" x 3.12") US; 15.1cm x 2.96cm x 8.6cm (5.95" x 1.17"
x 3.39"), 15.1cm x 2.96cm x 8.0cm (5.95" x 1.17" x 3.15") EU (W, D, H).
WEIGHT: 0.6kg (1.4lbs).
ACCESSORIES: Power supply.