SurgeX SX1120RT Surge Elminator & Power Conditioner 20As at 120 Volts

SurgeX SX1120RT Surge Elminator & Power Conditioner - 20 Amps at 120 Volts

The SX1120RT has remote control capability for use in AC power distribution systems and can be interfaced with a sequential controller such as the SurgeX SEQ.

Switched receptacles can be controlled with an applied voltage (5-30 vdc) or contact closure switch connected to the Phoenix connector on the back panel. The connector can also be used to cascade multiple units or provide status to a central controller.

The SX1120RT provides guaranteed surge protection and power conditioning for audio, video, broadcast and computer equipment. The units are 20-amp load-capable and have 8 industrial grade grounded AC receptacles (6 switched, 2 always on) plus a front panel courtesy receptacle.

The unit features both common mode and normal mode Impedance Tolerant EMI/RFI filtering, SurgeX ICE -Inrush Current Elimination and COUVS -Catastrophic Over/Under Voltage Shutdown for a complete power conditioning solution.

SurgeX Advanced Series Mode technology is superior to conventional MOV circuitry or MOV-Hybrid designs and is completely non-sacrificial. Our zero let-through technology provides the most reliable protection available. It stops all surges up to 6,000 volts (unlimited surge current) without producing harmful side effects such as ground contamination or common-mode disturbances.

SurgeX SX1120RT Features:

• Magnetic shielding steel enclosure
• 9' grounded 3-wire #12 line cord
• 8 grounded AC outlets on rear panel (6 switched, 2 always on)
• Front panel courtesy receptacle
• Advanced Series Mode surge protection
• Advanced Impedance Tolerant EMI/RFI filtering
• SurgeX ICE inrush current elimination technology
• COUVS catastrophic over/under-voltage shutdown
• Remote turn-on
• Thermal circuit breaker overload protection
• Self-test circuit with visual indicator
• 10-year warranty
• Made in U.S.A.

SurgeX SX1120RT Specifications:

• Load Rating: 20 amps @ 120 volts
• Power Requirement (no load): 15 watts
• Surge Let-Through Voltage (6000-volt surge): 0 volts
• UL 1449 Adjunct Classification Test Results:
  1000 surges, 6000 volts, 3000 amps, B3 pulse.
  Measured suppressed voltage: 170 volts, no failures
• Federal Guidelines: Grade A, Class 1, Mode 1 (CID A-A-55818)
• EMI/RFI Filter, Normal Mode (50-ohm load):
  40 dB @ 100 kHz; 50 dB @ 300 kHz;
  50 dB @ 3 MHz; 50 dB @ 30 MHz
• EMI/RFI Filter, Common Mode (50-ohm load):
  18 dB @ 300 kHz; 30 dB @ 1 MHz;
  50 dB @ 5 MHz; 50 dB @ 20 MHz
• Maximum Applied Surge Voltage: 6000 volts*
• Maximum Applied Surge Current:
  Unlimited, due to current limiting*
• Maximum Applied Surge Energy:
  Unlimited, due to current limiting*
• Endurance (C62.41-1991 Category B3 pulses):
  1 kV>500,000; 3 kV>10,000; 6 kV>1000
• Undervoltage Shutdown: 90 volts (resume at 100 v)
• Overvoltage Shutdown: 145 volts (resume at 135 v)
• Maximum Load Inrush Current During Power-up:
  1000 Joules
• Remote Turn-on Applied Voltage Range: 5 to 30 volts DC
• Remote Turn-on Current Draw:
  Contact Closure: 1.5 mA
  5 V DC Applied Voltage: 0.1 mA
  12 V DC Applied Voltage: 1.5 mA
  24 V DC Applied Voltage: 5.0 mA
• Auxiliary Relay Contact Rating: 30 Volts at 1 Amp
• LED Output: 12 volts DC, maximum 20 mA (resistor required)
• Dimensions: 1.75" H x 19" W x 10.5" D (4.5 x 48.3 x 26.7 cm)
• Weight: 11 lbs (5 kg)
• Temperature Range: 5? to 35? C
• Humidity Range: 5% to 95% R.H., non-condensing
• Agency Listings: ETL and cETL (UL 1449,
  2nd edition; CSA C22.2 No.8-M1986, R2000)

*1.2 x 50 ?pulse, industry standard combination wave surge, as per IEEE C62.41