Teradek 10-0990-2G Bolt 990-2 Pro 2000 with Gold Mount SDI/HDMI Wireless Video Transmitter & Dual Receiver Deluxe Kit

Bolt 990-2 Pro 2000 with Gold Mount SDI/HDMI Wireless Video Transmitter & Dual Receiver Deluxe Kit

Specifications:

• Transceiver
  Video Inputs
• 1 x 75 Ohm BNC
• 1 x Type A receptacle HDMI
  Video Outputs
• 1 x 75 Ohm BNC (Loop-out)
  Color Sampling
• Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later);
• RGB 4:4:4 (HDMI out, 8-bit color)
  Delay Tx To Rx
• <0.001sec (when no video format conversion is enabled)
  Rf Power
• 22dbm EIRP (with two RP-SMA 5dbi TX antennas)
  Range
• Up to 2000fts line of sight
  Power Input
• 2-Pin Lemo 7-28 VDC
  Battery
• None
  Nominal Power Consumption
• 7.7 Watts (Measured at 1080p60)
  Operating Temperature
• 0 ~ 50 deg-C
  Dimensions
• 4.3? x 2.6? x 1.0? (109.2 x 66.0 x 26.8 mm)
  Weight
• 9.5oz (270g)
  
• Receivers
  Video Outputs
• 1 x USB 3.0 micro B receptacle
• 1 x 75 Ohm BNC
• 1 x Type A receptacle HDMI
  Color Sampling
• Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later);
• RGB 4:4:4 (HDMI out, 8-bit color)
  Delay Tx To Rx
• <0.001sec (when no video format conversion is enabled)
  Rf Power
• 17dbm EIRP (with one 2dbi TX antenna)
  Range
• Up to 2000fts line of sight
  Power Input
• 2-Pin Lemo 7-28 VDC
  Battery
• None
  Nominal Power Consumption
• 8.0 Watts (Measured at 1080p60)
  Operating Temperature
• 0 ~ 50 deg-C
  Dimensions
• 5.8? x 3.5? x 1.0? (147.3 x 88.5 x 25 mm)
  Weight
• 13.8oz (390g)

Item Includes:

• 1 x Protective SKB Case
• 1 x Panel Antenna Array 5GHz 3x16dBi 2x 14dBi Black
• 1 x Bolt RX Single AB-Mount Battery Plate 14.4V
• 1 x 1-Year Warranty
• 2x Wireless Antennas (5dBi 5.8GHz) - For Tx
• 1x 2-pin Lemo to PowerTap 18 inch Cable
• 1x Hot Shoe Adapter (1/4"-20 inch)
• 1x SDI (BNC to BNC) Cable 10 inch
• 1x HDMI 18in Cable (Type A to Type A)
• 5x Wireless Antennas (2dBi 2.4/5.8GHz)
• 1x Thumb Screw 1.25 inch length (1/4"-20 inch)
• 1x Lightstand Adapter (1/4"-20 inch)
• 1x SDI (BNC to BNC) Cable 10 inch
• 1x HDMI 18in Cable (Type A to Type A)
• 1x USB 3.0 Cable A to Micro B (3ft Length)
• 1x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
• 1 x 3/8" Lightstand Adapter
• 5 x N-Male to RP-SMA 12 inch cables (for use with Bolt Rx Only)
• 1 x 1/4 20" Thumb Screw Plastic Head 2 inch length
• 1 x 1/4 20" Thumb Screw Plastic Head 3/8 inch length
• 1 x 1/4-20" Screw Phil Pan Mach Black 3/8 inch length

Warranty:

• 1 Year