Teradek 10-0995-1V Bolt Pro 3000 Wireless Video Tx/Rx Set with 3000 Ft Range - V-Mount SDI/HDMI

$10,490.00
Unit price per

With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable (1 Transmitter can multicast up to 4 Receivers), manual frequency selection and USB 3.0 GRAB Engine are all included on these models.

Longer Range
Transmit visually lossless video up to 3000ft with no delay.

20MHz Channels
Use more than twice as many Bolts in one location or avoid interference like never before.

2 New DFS Channels
Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels.

20% Smaller Chassis
Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.

Individual Identity
Easily identify which Bolt TX and RX work together with removable colored top plates.

Rapid Reconnection
Reconnect times during a dropped link are now instantaneous once you move back into range.

Built-In HDMI to SDI Converter
Perfect for use with MoVI and other gimbals, Bolt?s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.

More Robust
Than Ever Before Reach your Bolt?s full range and potential right out of the box with new software that provides the most robust wireless link we?ve ever created.

Comes with a Bolt Pro 3000 Transmitter, 1 Bolt 3000 Receiver, 1 V-Mount, and an antenna array in an SKB Utility Case.

Features:

Longer Range - Up to 3000 Feet
20MHz Channels - Use Many Bolts in One Location
2 New DFS Channels - Interference Free
20% Smaller Chassis - Better Camera Integration
Individual Identity
Rapid Reconnection
Built-In HDMI to SDI Converter - Perfect for MoVi & Similar Gimbals
More Robust Wireless Link

Specifications:

Video Inputs Transmitter: 1 x 75 Ohm BNC; 1 x Type A receptacle HDMI
Video Outputs Transmitter: 1 x 75 Ohm BNC(Loop-out)
Video Outputs Receiver: 1 x USB 3.0 micro B receptacle; 1 x 75 Ohm BNC; 1 x Type A receptacle HDMI
Color Sampling: Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)
Delay Tx To Rx: <0.001sec (when no video format conversion is enabled)
Supported Resolutions
1080p60/59.94/50/30/29.97/25/24/23.98
1080psf30/29.97/25/24/23.98
1080i60/59.94/50
720p60/59.94/50
480p59.94/576p50 (via HDMI ports only)
480i(NTSC)/576i(PAL)
Encryption: AES-128
Audio Compression: 48kHz 24-bit PCM
Dimensions - Transmitter: 0.95" x 2.6" x 4.47" (24 x 66 x 101.5 mm)
Dimensions - Receiver: 5.5? x 3.5? x 1.0? (139 x 88.5 x 25 mm)
Receiver Frontpanel OLED: LCD Screen with Menu Joystick Navigation
Desktop App: Feature-rich Bolt Manager Application for OSX & Windows
USB Power: Upgrade via Mini-USB
Non-DFS Frequencies: US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz; EU & JP: 5.19 ~ 5.23 GHz
DFS Frequencies: US: 5.27 ~ 5.55 GHz and 5.67 GHz; EU & JP: 5.27 ~ 5.67 GHz
Rf Power: 22dbm EIRP(with two 5dbi TX antennas)
Range: Up to 3000ft line of sight
Unicast Multicast: Unicast / Multicast
Noise Rejection: Can coexist with WiFi and 5GHz cordless phones
Power Input: 2-Pin Lemo 7-28 VDC
Battery: None
Nominal Power Consumption Transmitter: 7.5 Watts (Measured at 1080p60)
Nominal Power Consumption Receiver: 8.5 Watts (Measured at 1080p60)
Operating Temperature: 0 ~ 50 deg-C
Mountability: Multiple mounting options with 4-40 holes; Multiple mounting options with 1/4" holes

Item Includes:

1 x Protective SKB Case
1 x Panel Antenna Array 5GHz 3x16dBi 2x 14dBi Black
1 x Bolt RX Single V-Mount Battery Plate 14.4V
1 x 2pin Lemo to PowerTap - 11 inch Cable
2 x SDI Cables (BNC to BNC)
2 x HDMI Cables (Type A to Type A)

Warranty:

1 Year