Zektor Prowler 8x8 Component Video Matrix with Analog/Digital Audio & 8 CAT5 Rx

• Video, Audio and Power sent down a single CAT5/6/7 cable.
• No power, or ground, needed at the receiver side.
• Perfect for retrofits where only one CAT5/6/7 cable is pre-installed, but video and audio are both needed at the destination site.

• 450MHz bandwidth local ouputs, DC coupled inputs and outputs, for the most demanding video applications.
• 150MHz bandwidth CAT5/6/7 outputs, DC coupled for deep blacks and bright whites, and for black and white transitions without loss of sync.
• Local component video outputs mirror CAT5/6/7 outputs.
• 8 Channels of YPbPr, YCbCr or RGsB video.
• 3 Channels of composite to component video conversion.
• Full control of Contrast, Brightness, Saturation and Hue on the composite inputs.
• 8 Component video zones which can be switched to any of the 11 input channels.

• Volume, Balance, Bass, Treble and 5 Band Equalizer control of analog AND digital audio.
• Analog audio is automatically converted to digital audio, digital audio is automatically converted to analog audio.
• Both analog and digital audio is available simultaneously on the outputs.
• Local stereo analog audio, and S/PDIF audio outputs.
• Volume range: 0dB to -99.5dB, and full mute, with 0.5dB step resolution.
• Tone / EQ ranges: +20dB to -20dB, with 0.5dB step resolution.
• Gain settings (+/-24dB) for each input, seperate gains available for digital and analog.
• Lip sync delay from 0 to 170ms, per zone and/or per input.
• 8 coax digital inputs and 4 optical digital inputs w/auto conversion to coax for easy integration with cable boxes.

• TCP/IP, Bi-directional RS-232 and RS-422, Front panel IR sensor, Rear panel IR jack.
• TCP/IP and RS-232 / RS-422 share the same protocol. Protocol allows for polled or instant update modes. Polled or instant update modes are settable on a command by command basis.
• Over 350 discrete IR codes!

ZEK-SC-RX-WALL or ZEK-SC-RX-DECORA is required.