CE Labs CAT5 Distribution Amplifier - Transmitter
Audio/Video Distribution Hub & Receiver Distribute high definition component or composite video and digital or left or right audio over extended distances using CAT5 wire.
-
CAT5 TX - Transmitter
- Active amplification ensures high quality transmission
- Loop output for use of additional CAT5 transmitters
- Two CAT5 outputs for additional location
- Discrete passive IR channel for the use of externa lIR remote control systems
CAT5 RX - Receiver
- Cable length equalizer for long distances
- Video continuity LEDs to ensure all signals are transmitting
- IR port
- Video
- Nominal Input Level: 1 Volt peak to peak
- Gain: 1 Volt into 75 ohms (2 Volts unterminated)
- Input Impedance (CAT5 TX): 75 ohms
- Output Impedance (CAT5 RX): 75 ohms
- Isolation port to port: > 65 dB
- Isolation out to input: > 80 dB
- Return loss: > 30 dB
- Video bandwidth: > 50 MHz (HDTV requires 37 MHz min.)
- Distance: 300 feet @ 1080i (500 feet with CAT6 cable)
- 3 composite video signals may be substituted onthe individual component video inputs (1000 Ft. max).
- Audio (Analog)
- Nominal Input level: 1 Volt peak to peak
- Gain: Unity (slightly reduced at max cable length)
- Input Impedance: 22k ohm
- Output Impedance: 1k ohm
- Frequency Response: 20 Hz to 20 KHz
- Signal to Noise: 80 dB @ 1 Volts out
- Audio (Digital)
- Supports standard SPDIF digital audio
- Power
- Requirement: External 9 or 10 Volt AC @ 600 mA with a (2.1 mm center) Coaxial connector.
- NOTE: Composite video may be used for security orwith standard monitors
