Cobalt Digitalÿ9910DA-4Q-3G-RCK 3G/HD/SD Quad-Channel Multi-Rate Distribution Amplifier with x4 Output Crosspoint

$815.90
Unit price per

The all-new Cobalt 9910DA-4Q-3G-RCK 3G/HD/SD Quad-Channel Multi-Rate Reclocking DA with x4 Output Crosspoint supports four input channels which can be crosspoint-routed to any of 16 DA outputs. The 9910DA-4Q-3G-RCK is multi-rate with user enable/disable reclocking, and supports SDI and ASI/DVB on all inputs and outputs with non-inverting outputs. The quad-input capacity provides a one-card solution for distribution of 4K quadrant-division content over 3G/HD/SD-SDI interfaces.

The extremely flexible crosspoint (which is user-configurable via DashBoard GUI remote control) allows quad 1x4, dual 1x8, single 1x16 and other routing possibilities. Any of the four input channels can be distributed or duplicated across four groups of 1x4 DAs, and any of the four inputs can be set to use an alternate failover input upon loss of signal.

Excellent receive performance allows receive EQ for up to 120m 3G and 160m HD cable length (1694A). Card edge and DashBoard remote status monitoring indicates input lock for each input channel. Up to 10 of the 9910DA-4Q-3G-RCK cards can be installed in a frame to provide 40 channels of input, with distribution to up to 160 outputs.

Full user DashBoard or Remote Control Panel remote control allows full status and control access locally or across a standard Ethernet network.

NOTE: Rear output module required.

Features:

Full support of 3G/HD/SD-SDI and ASI/DVB
Reclocking can be enabled or disabled for each input channel
One-card solution for distribution of 4K quadrant-division content over 3G/HD/SD-SDI interfaces
Excellent receive performance - EQ allows 1694A cable lengths up to 120m (3G) / 160m (HD) / 400m (SD)
Flexible output crosspoint allows card to function as quad-channel 1x4, dual-channel 1x8, or single-channel 1x16 reclocking DA
Failsafe mode automatically switches to selected secondary input on loss of primary input
Input data rate auto-detection for all industry-standard data rates
All outputs are non-inverting - ASI can be outputted on any output
Card edge and DashBoardT status and individual input lock indicators
Five year warranty

Specifications:

Power
< 3 Watts
3G/HD/SD-SDI / ASI Inputs
(4) 75Ω BNC inputs (A thru D)
SDI Formats Supported: SMPTE 259M, SMPTE 292M,
SMPTE 424M
SDI Return Loss: >15 dB up to 1.485 GHz; >10 dB up to
2.970 GHz
Receive Performance (Cable Length; Belden 1694A
3 Gbps: 120m
1.485 Gbps: 160m
143-360 Mbps: 400m
3G/HD/SD-SDI / ASI Outputs
(4x4) 75Ω BNC outputs (16 total). Each group of 4 outputs
can be crosspoint connected to inputs A thru D.
Signal Level: 800 mV nominal
Return Loss: >15 dB at 5 MHz - 1.485 GHz
Jitter (wideband): HD < 0.2 UI
NOTE: Rear output module required.

Warranty:

5 Years