DPA SC4071 d:screet Omnidirectional Microphone - Low-Cut - Presence Boost - Black

The d:screet 4071 Omnidirectional Microphone, Low-cut, Presence Boost adapts to your needs. With eminent sound quality, a large range of accessories and adapters available for all pro wireless systems, this miniature condenser mic is the obvious choice for any application requiring a big sound and a small Ftprint.

The d:screet 4071 Omnidirectional Microphone, Low-cut, Presence Boost is an outstanding speech and vocal mic. It makes voice heard and intelligible. It is also resistant to moisture, extreme temperature change and humidity.

When recording voices from mic placement on a performer's body, no frequency below 100 Hz is attractive. For this reason, an acoustical low-cut has been incorporated in the mic capsule so the built-in preamplifier (and the wireless system) will have much larger headroom. Furthermore, it removes distant rumbling from cars, trains, airplanes, etc.

Another equally important consideration is that when placing a microphone on the body, especially on the chest, the frequency range of the consonants is damped, resulting in poor intelligibility. The d:screet 4071 Omnidirectional Microphone, Low-cut, Presence Boost has a built-in boost to compensate for this loss. Especially for ENG work, this mic is perfect because almost no ENG mixer leaves any possibility for a compensation of this kind.

Features:

• Extremely rugged and reliable
• Exceptional audio quality
• Low noise and high sensitivity
• Large selection of accessories
• Modular adapter system fits most professional wireless systems

Specifications:

• Directional pattern: Omnidirectional
• Principle of operation: Pressure
• Cartridge type: Pre-polarized condenser
• Frequency range: 20 Hz - 20 kHz
• Frequency range, ±2 dB: 100 Hz - 15 kHz with typ. 5 dB soft boost at 4 - 6 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 ? (max. 28 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
• S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
• Total harmonic distortion (THD): < 1% THD up to 123 dB SPL peak; < 1% up to 120 dB SPL RMS sine
• Dynamic range: Typ. 97 dB
• Max. SPL, peak before clipping: 144 dB
• Output impedance: 30 - 40 Ohm
• Cable drive capability: Up to 300 m (984 ft)
• Power supply (for full performance): For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance
• Connector: MicroDot
• Color: Black, beige or white
• Weight: 7.5 g (0.26 oz) incl. Cable and MicroDot connector
• Microphone diameter: 5.4 mm (0.21 in)
• Microphone length: 17 mm (0.67 in)
• Cable length: 1.8 m (5.9 ft)
• Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
• Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)