Earthworks DFK1 Drum Full Kit Sytem 1
The Drum FullKit is the ultimate, and every drummer?s dream. The nine FullKit microphones allow you to mike every piece of your entire drum set (2-OH, 1-hi-hat, 1-snare, 4-toms & 1-kick drum) with Earthworks? High Definition Microphones.
Features:
- Improved impulse response for faster and more accurate transients
- Shorter diaphragm settling time to prevent quieter attacks from being blurred by earlier loud attacks
- Extended frequency response to 30 kHz to capture a crisper and more realistic image
- Near perfect polar patterns that remain even across all frequencies and at any position within the pattern
- More cohesive and unified drum sound
- Hear more attack and subtle detail
- Increased detail and dynamic range
- Versatile, multi-use mics
- Mics are protected in a high impact case
- Ideal three-mic choice for live performance or recording in less than ideal acoustic environments
- Fast setup and teardown
- 5 DP30/C tom & snare microphones, 5 RM1 RimMounts, 9 LevelPads, 1 windscreen to mike snare, 2 windscreens for mounted toms, 2 windscreens for floor toms, 2 SR25s for overheads, 1 SR30 for hi-hat, 1 SR30 for kick drum, 1 KickPad, 2 SRW2 Stainless Steel vocal windscreens, 2 high-impact road cases
Specifications:
- DP30/C
- Frequency Response: 30Hz to 30kHz ?2dB at 6 inches (15cm)
- Polar Pattern: Cardioid
- Sensitivity: 10mV/Pa (-40dBV/Pa)
- Power Requirements: 48V Phantom, 10mA
- Max Acoustic Input: 145dB SPL
- Signal-to-Noise Ratio: 72dB A-weighted
- Output: XLR (pin 2+)
- Output Impedence: 100? balanced (50? each pins 2 & 3)
- Min Output Load: 600? between pins 2 & 3
- Noise: 22dB SPL equivalent (A weighted)
- Dimensions L x D: 275mm x 22mm (10.75 x .860 inches)
- Gooseneck Length: 159mm (6.75 inches)
- Weight: .25 lb. (1.13kg)SR25
- Frequency Response: 50Hz ? 25kHz ?2dB at 6 inches (15cm)
- Polar Pattern: Cardioid
- Sensitivity: 10mV/Pa (-40dBV/Pa)
- Power Requirements: 48V Phantom, 10mA
- Max Acoustic Input: 145dB SPL
- Output: XLR (pin 2+)
- Output Impedance: 100?, balanced (50? ea. pin 2 & 3)
- Min Output Load: 600? between pins 2 & 3
- Noise: 22dB SPL equivalent (A weighted)
- Dimensions L x D: 165mm x x 22mm (6.5 x .860 inches)
- Weight: .35 lb (160g)SR30
- Frequency Response: 30Hz ? 30kHz ?2dB at 6 inches (15cm)
- Polar Pattern: Cardioid or Hypercardioid
- Sensitivity: 10mV/Pa (-40dBV/Pa)
- Power Requirements: 48V Phantom, 10mA
- Max Acoustic Input: 145dB SPL
- Output: XLR (pin 2+)
- Output Impedance: 100?, balanced (50? ea. pin 2 & 3)
- Min Output Load: 600? between pins 2 & 3
- Noise: 22dB SPL equivalent (A weighted)
- Dimensions L x D: 212mm x x 22mm (8.4 x .860 inches)
- Weight: .5 lb (225g)
Includes:
- LP1530 - LevelPad switchable mic pad -15 or -30dB
- KP1 - KickPad Mic level kickdrum processor
- MC1 - Standard microphone clip for all drum mic models
- MC2 - Shock Mount microphone clip for all drum mic models
- PW1 - Foam teardrop windscreen for Drum Periscope Series
- RM1 - Drum RimMount for Drum Periscope Series
- SRW2- Stainless Steel Windscreen for SR30 & SR30/HC
- SRW3 - Foam Windscreen for SR25
- DFK-C -High Impact Case for FullKit DrumKit Mics (requires 1 CMK-C & 1 DFK-C)