Earthworks M30mp Matched Pair Omni Measurement Microphone - 5Hz TO 30kHz
30kHz omnidirectional measurement microphone ? matched pair
The M Series has become the accepted standard for affordable, reliable reference and measurement microphones that are accurate in the time domain and frequency response. They are remarkably stable with respect to temperature and atmospheric conditions and are optimized for clean, very fast impulse performance providing accurate wideband response with virtually no handling noise.
Features:
- 30kHz flat frequency response
- Cost effective measurement microphone
- Improved version of the SMAARTMIC previously offered by EAW
- Ideally suited for acoustical measurements sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
- Omnidirectional polar pattern
- Flat frequency response, fast impulse response and exceptional polar characteristics
- Used by SMAART, MLSSA, Spectrafoo, TEF and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
- Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
- Requires 48V Phantom Power
- Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
- Electronic Calibration File available
Specifications:
- Matched Pair
- Frequency Response: 5Hz to 30kHz ?1/-3dB
- Polar Pattern: Omnidirectional
- Sensitivity: 30mV/Pa (-30.5dBV/Pa)
- Power Requirements: 48V Phantom, 10mA
- Max Acoustic Input: 142dB SPL
- Output: XLR (pin 2+)
- Output Impedance: 100?, balanced (50? ea. pin 2 & 3)
- Min Output Load: 600? between pins 2 & 3
- Noise: 22dB SPL equivalent (A weighted)
- Dimensions L x D: 165mm x 22mm (6.5 x .860 inches) each
- Weight: .35 lb. (160g) each
Includes:
- ADP1 - 1/2" calibrator adapter for all M Series measurement mics
MC1 - Microphone Clip for QTC, TC, SR, P, DP & M Series mics (specify black or white) - MC2 - Shock mount Microphone Clip for QTC, TC, SR, P, DP & M Series mics
OMW1 - Foam Teardrop Windscreen for QTC, TC & M Series Mics
OMW2 - 100 mile-per-hour Windscreen for QTC, TC & M Series Mics
OMW3 - Standard Foam Windscreen for QTC, TC & M Series Mics
