ESE 1X4 Video Distribution Amplifier with 19 in. Rack Mount

The ES-201 provides a loop-thru input and four isolated outputs, all accessible via BNC connectors. An independent screwdriver-adjustable Gain and Equalization control for each output are provided on the front of the case. Up to 1000 feet of cable may be compensated by adjusting the EQ trimmer. The Gain control provides an overall signal level adjustment of - 2 to +3 db. When the input is not looped thru to other equipment, a 75 ohm terminator should be used on the free input connector. Unused outputs need not be terminated.Features:

• BNC connectors
• Loop-thru video input
• 4 isolated outputs (75 ohm)
• 10 MHz frequency response
• Independent Gain & HF Equalization controls for each output
• Black anodized aluminum enclosure (single-rack panel optional)
• 220-240 VAC (110-120 VAC is standard) & UL options available
• Various Options available
• Cascadable
• Loop-Thru Input
• Recessed Controls
• DC Coupling Available
• Four Separate Pairs Of Gain & EQ Controls
• Rack Mount Option Available (one per panel or two per panel)
• Each Output Can Compensate For Up To 1000 Feet Of RG-59 Cable
• Options Available: Black (1), J, P, P2, UL, W (1)

Options:

• (Black) Black Anodized Front Panel-option available when standard panel is clear anodized
  List: $15.00
• © Crystal Time Base (2-3 seconds week accuracy)
  List: $60.00
• (D) Remote Control via 6 ft Cable, Connector, Switch Plate
  List: (extra cable at $2.00/ft) $65.00
• (DC) 12 - 35 VDC Operation (No AC Power Input is supplied with Option "DC")
  List: $250.00
• (ESE) ESE Serial Time Code Output
  List: $30.00
• (EQ) Front panel accessible Equalization trimmer when cable is to exceed 100' (400' max.)
  List: 25.00
• (J) 220 Volt / 50 Hz Operation (Standard is 117 Volt / 60 Hz)
  List: (+ option "UL" = $125.00) $30.00
• (L2) 2 Additional Video Loop Thru's
  List: $150.00
• (L4) 4 Additional Video Loop Thru's
  List: $300.00
• (MT) Precision Multi-turn Potentiometers for Gain Control (Standard with ES-246/XLR) see above
• (P) 19" Rack Mount
  List: $55.00
• (P2) 19" Rack Mount mounts two (2) units (with P2 Option) side-by-side (Consult ESE factory)
  List: $75.00
• ® Rear-mounted connector for Remote Control (standard on many units)
  List: $55.00
• (SV) S-VHS connectors are provided instead of standard BNC connectors
  List: $75.00
• (Sync) Composite Sync Output; 2 vpp into 75.
  List: $30.00
• (Tone) Continuous 1KHz Tone at 0db for Synching Audio with Video
  List: $55.00
• (UL) "UL" Approved Wall Mount Power Supply
  List: (+ option "J" = $125.00) $60.00
• (W) 3 Wire Line Cord
  List: $16.00
• (XLR) XLR Connectors instead of standard Terminal Block see above
• NOTES:
  1) Included at no charge
  2) Includes Windows control software
  3) With option 'SV' only one of the following options may be specified 'L2', 'L4', or 'P2'

NOTE: FOR CUSTOMIZATION WITH THESE OPTIONS PLEASE CALL FIRST BEFORE ORDERING