ESE Dual 1 X 4 Audio/Video DA With 5 Black Burst Sync Outputs

Each of the two 1 x 4 Video DA's provide a loop-thru input and four isolated outputs. Screwdriver adjustableGain and EQ controls are accessible on the front panel, all inputs and outputs are provided on rear mounted BNC connectors. Both 1 x 4 Audio DA's accept one balanced (or unbalanced) audio signal and produce four identical copies. Each of the totally isolated outputs has its own front panel-mounted Gain control (an adjustable,internally mounted input attenuator is also provided).The audio inputs and outputs are accessible on rearmounted terminal blocks. If unbalanced outputs are desired, then each of the 1 x 4 Audio DistributionAmplifiers can provide up to eight separate and isolated feeds. The BBSG provides a convenient source of composite black burst for pre-blacking video tape or for general synchronization purposes. The output signal consists of sync, blanking, reference black setup level and colorburst which is SCH phased. The five RS-170A outputs are provided on rear mounted BNC connectors.

Features:
• Two 1x4 Video Distribution Amplifiers with looping inputs
• Two 1x4 Audio Distribution Amplifiers
• A five-output RS-170A Video Blackburst Generator
• BNC connectors for Video
• Terminal blocks for Audio
• Isolated outputs
• Video Gain & High-frequency Equalization controls
• Audio Gain controls (one for each output)
• Single Rack unit
• 220-240 VAC (110-120 VAC is standard) & UL options available
• Video Gain & EQ Controls
• Audio Gain Controls
• Five RS-170A Black Burst/Sync Outputs
• Rack Mount Enclosure
• Two 1 X 4 Video DA's
• Two 1 X 4 Audio DA's
• Accepts Balanced or Unbalanced Audio
• Broadcast Quality Audio & Video
• Options Available: Black(1), J, P(1), UL W(1)

Options:
• (Black) Black Anodized Front Panel-option available when standard panel is clear anodized
  List: $15.00
• © Crystal Time Base (2-3 seconds week accuracy)
  List: $60.00
• (D) Remote Control via 6 ft Cable, Connector, Switch Plate
  List: (extra cable at $2.00/ft) $65.00
• (DC) 12 - 35 VDC Operation (No AC Power Input is supplied with Option "DC")
  List: $250.00
• (ESE) ESE Serial Time Code Output
  List: $30.00
• (EQ) Front panel accessible Equalization trimmer when cable is to exceed 100' (400' max.)
  List: 25.00
• (J) 220 Volt / 50 Hz Operation (Standard is 117 Volt / 60 Hz)
  List: (+ option "UL" = $125.00) $30.00
• (L2) 2 Additional Video Loop Thru's
  List: $150.00
• (L4) 4 Additional Video Loop Thru's
  List: $300.00
• (MT) Precision Multi-turn Potentiometers for Gain Control (Standard with ES-246/XLR) see above
• (P) 19" Rack Mount
  List: $55.00
• (P2) 19" Rack Mount mounts two (2) units (with P2 Option) side-by-side (Consult ESE factory)
  List: $75.00
• ® Rear-mounted connector for Remote Control (standard on many units)
  List: $55.00
• (SV) S-VHS connectors are provided instead of standard BNC connectors
  List: $75.00
• (Sync) Composite Sync Output; 2 vpp into 75.
  List: $30.00
• (Tone) Continuous 1KHz Tone at 0db for Synching Audio with Video
  List: $55.00
• (UL) "UL" Approved Wall Mount Power Supply
  List: (+ option "J" = $125.00) $60.00
• (W) 3 Wire Line Cord
  List: $16.00
• (XLR) XLR Connectors instead of standard Terminal Block see above
• NOTES:
  1) Included at no charge
  2) Includes Windows control software
  3) With option 'SV' only one of the following options may be specified 'L2', 'L4', or 'P2'