Intelix S-V1CP Composite Video Control and Power Balun
Intelix S-V1CP Composite Video Control and Power Balun
The Intelix S-V1CP transmits composite video, two conductor control, and power over a single twisted pair cable, such as Cat 5 or Cat 6. The S-V1CP features a male BNC connector for direct connection to source and destination devices, as well as male and female DIN power connectors and two bare control leads. Used in pairs, S-V1CP baluns replace bulky coaxial video cable and utilize a building's existing structured cabling network. The S-V1CP conforms to IEC 61000-4-2:1995 protection standards and features exceptional interference rejection. S-V1CP baluns are ideal for security and monitoring applications with such equipment as CCTV cameras, monitors, DVRs, video sequencers, video multiplexers, quads, switchers, and servers.
Technical Specifications
The Intelix S-V1CP transmits composite video, two conductor control, and power over a single twisted pair cable, such as Cat 5 or Cat 6. The S-V1CP features a male BNC connector for direct connection to source and destination devices, as well as male and female DIN power connectors and two bare control leads. Used in pairs, S-V1CP baluns replace bulky coaxial video cable and utilize a building's existing structured cabling network. The S-V1CP conforms to IEC 61000-4-2:1995 protection standards and features exceptional interference rejection. S-V1CP baluns are ideal for security and monitoring applications with such equipment as CCTV cameras, monitors, DVRs, video sequencers, video multiplexers, quads, switchers, and servers.
Technical Specifications
- Max Distance
Video: 1,000 feet
Power: 650 feet
Control: 1,000 feet - Bandwidth DC to 8 MHz
- Maximum Input 1.1 Vp-p
- Video Signal 1 Vp-p, 75 ohms
- Attenuation 1.5 dB max
- Impedance 75 ohms
- Insertion Loss Less than 2 dB over the frequency range
- Return Loss Greater than 15 dB over the frequency range
- Common Mode Rejection Greater than 40 dB over the frequency range
- Protection 1 KV (common mode)
10/700 us - Cable Cat 5, Cat 5e, Cat 6, and Cat 7 compatible
- Interference Rejection Yes
- Maximum Supported Wattage 18 watts
- Maximum Supported Voltage 48 volts at 15.4 watts
- Supported Control RS422, RS485, DC
- Power Maximum Current 1.0 amps
- Connectors (1) male BNC
(1) male mini-DIN (power)
(1) female mini-DIN (power)
(1) two bare wire leads (control)
(1) RJ45 - Power Connector Size 0.215" outer diameter
0.081" inner diameter - Enclosure ABS plastic
- Dimensions 2.5" x 0.75" x 1.38"
- Compliancy FCC, CE, RoHS