Kramer TP-582R 1:2 HDMI Plus Bidirectional RS-232 over Cat5 Receiver

The TP-582R is a high-quality twisted pair receiver for HDMI, Ethernet 100BaseT, bidirectional RS-232 and IR signals. The TP-582T selects one of two HDMI inputs, and converts it with the Ethernet 100BaseT, RS-232 and IR input signals to a twisted pair signal. The TP-582R converts the twisted pair signal back to Ethernet 100BaseT, RS-232, IR and two HDMI outputs, and de-embeds the audio to S/PDIF and TOSLINK audio outputs.

• Max. Data Rate - 2.25Gbps.
• HDBaseT Technology. HDTV Compatible. HDCP Compliance. HDMI Support - HDMI (V.1.4 with Deep Color, x.v.Color, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC).
• 3D Pass-Through. EDID PassThru - Passes EDID signals between the source and display.
• Bidirectional RS-232 Interface - Commands and data can flow in both directions via the RS-232 interface, allowing status requests and control of the destination unit.
• Ethernet Interface - Passes 100BaseT.
• System Range - Up to 100m (330ft).
• Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BCP-DGKat724 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
• Control - Front panel.
• Indicators - Status LEDs for input selection, output, link and power.
• Compact MegaTOOLS - 2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B universal rack adapter.

• INPUTS: 1 RJ-45 connector.
• OUTPUTS: 2 HDMI connectors, 1 IR on a 3.5mm mini jack, 1 Ethernet 100BaseT on an RJ-45 connector, 1 RS-232 on a 9-pin D-sub connector, 1 TOSLINK optical audio, 1S/PDIF in an RCA connector.
• BANDWIDTH: Supports up to 2.25Gbps bandwidth per graphic channel.
• COMPLIANCE WITH HDMI STANDARD: Supports HDMI and HDCP.
• POWER SOURCE: 5V DC, 1.55A.
• DIMENSIONS: 18.8cm x 11.4cm x 2.4cm (7.4" x 4.5" x 1.0") W, D, H.
• WEIGHT: 0.6kg (1.4lbs).
• ACCESSORIES: Power supply.
• OPTIONS: RK-T2B 19" rack mount.