Muxlab 500757-TX HDMI over IP H.264 Transmitter with PoE

$424.00
Unit price per

The HDMI over IP H.264 PoE Extender Kit allows HDMI source and display equipment to be connected in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. Connectivity may be up to 330ft (100m) @ 1080p via Cat5e/6 UTP cable, and the device supports PoE (PD) if used with a PoE (PSE) Ethernet Switch.

Features:

Supports HDMI up to 1080p resolution @ 30Hz
Supports 100?s of Transmitters & Receivers depending on network bandwidth
H.264 compression supports high image quality
High compression rate suitable for WiFi transmission
Extend HDMI up to 330ft (100m) over Cat5e/6
Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
Supports RS232 and IR transmission for remote control
PoE powered

Specifications:

Environment: HDMI (up to 1080p @ 30Hz)
Devices: DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting HDMI.
Control: Controllable via the Ethernet port.
HDMI standard: HDMI ver. 1.3, HDCP 1.1
Connectors:
One (1) HDMI receptacle for audio/video.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
One (1) DB9 for Serial Port for RS232.
One (1) 3.5mm jack for IR emitter/sensor.
Six (6) DIP Switches for device ID addressing.
Maximum Distance On HDMI (per side): 6.6ft (2m); On Cat5e/6: 330ft (100m)
Latency One: (1) Video Frame
Compression Video: H.264 fully compliant with ISO/IEC 14496-10 high profile and level 4.1, up to 1920x1080p @ 30Hz
Audio: MPEG
Network Requirement: Compliant with the full IEEE 802.3-2002 specifications (100BaseTX).
Network Bandwidth Video: 18Mbps, Audio: 256Kbps
IR Frequency: 38KHz to 56KHz
RJ45 Pin Configuration: Use EIA/TIA 568A or 586B straight through wiring.
RJ45 Link: Pin 1 (R) Pin 2 (T); Pin 3 (R) Pin 6 (T); Pin 4 (R) Pin 5 (T); Pin 7 (R) Pin 8 (T)
Power Source: This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately.
PoE Standard: IEEE 802.3af
Power Consumption Transmitter: 4.5W Receiver: 2.5W
Temperature Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure Type Metal enclosure.
Dimensions: 4.4? x 4.6? x 1.0? (111mm x 120mm x 25mm)
Weight: 1.5lbs (0.7kg)
Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty: 2 years

Warranty:

2 Years Part & Labor