Muxlab 500760 HDMI & DisplayPort AV Over IP 4K/60 Uncompressed Video Extender - Receiver

$1,393.18
Unit price per

The AV over IP 4K/60 Uncompressed Extender, UTP allows HDMI and DisplayPort equipment supporting up to 4K @ 60Hz resolution to be connected and extended to create a 4K/60 Video Wall, Virtual Matrix Switch, and Virtual Splitter arrangements of user configurable size (X by Y) supporting 100?s of screens, depending on network bandwidth, utilizing one Receiver for each display in the array. Each Transmitter (500760-TX) and Receiver (500760-RX) can be connected via Cat5e/6 cable up to 330ft (100m) from a 10Gig Ethernet Switch.

The Transmitter supports 2-Channel audio insertion and the Receiver supports 2CH audio extraction. The Transmitter and Receiver, each come with a power supply, an IR Emitter and IR Sensor for IR based remote control applications, a wall mount bracket kit for securing the unit to a wall and a 4-pin terminal block connector for RS232 connectivity.

The MuxLab Pro Digital Network Controller (500811) is available to simplify centralized configuration and control, software updates and allows for third party smartphone and tablet management.

Features:

Supports HDMI and DisplayPort 1.2a up to 4K/60.
Uncompressed up to 4K/60 (4:2:0) (zero latency), and light compression visually lossless at (4:4:4) (1 frame latency)
Supports Video Wall, Virtual Matrix Switch and Virtual Splitter configurations.
Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications.
Transmission up to 330ft (100m) over Cat5e/6
Supports audio insert (TX) & audio extract (RX)
Supports RS232 and IR transmission for remote control
Control via any web device (mobile, tablet) with use of model 500811 (Pro Digital Network Controller)

Specifications:

Environment: HDMI 2.0 and HDCP 2.2
Devices: Blu-Ray, projectors, monitors, TV, PC, laptops, and media servers supporting HDMI.
Bandwidth: 594MHz
Signals: HDMI 2.0 and DisplayPort 1.2a protocol
One (1) HDMI receptacle.
One (1) DisplayPort connector.
Two (2) RJ45S for Cat 5e/6 unshielded or shielded twisted pair (for 10GbE and 1GbE ports).
Two (2) 3.5mm jacks for IR emitter and IR sensor.
One (1) 3.5mm jacks for audio insertion/extraction (insert on TX, and extract on RX).
One (1) 4-pin terminal block connector for RS232.
One (1) 2.1mm power jack (for DC power).
Maximum Distance: Cat5e/6: 330ft (100m) up to 4K @ 60Hz
Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection
reduces the effective distance depending on the grade of twisted cable used.
Latency: No Compression (Zero Latency) up to 4K/60 (4:2:0), and less than one Frame (16ms) @ 4K/60 (4:4:4)
Compression Uncompressed up to 4K/60 (4:2:0), and light compression for 4K/60 (4:4:4) only
Network Bandwidth: < 10Gbps
Network Requirement: 10Gig Network XFI, IEEE 802.3
IR Frequency: 38 to 56KHz
RJ45 Pin Configuration: Reverse Polarity Sensitive. Use EIA/TIA; 568A or 586B straight-through wiring.
Cable One (1) Cat 5e/6 or better twisted pair cables required
Power Source Input: 100-240V/1.5A (max) @ 50-60Hz
Output: 12DC @ 3A
Power Consumption Transmitter: 13.32Watt Receiver: 15.96Watt
Temperature Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Dimensions: 8.25" x 16.14" x 1.37" (21cm x 14cm x 3.5cm)
Weight: 4.06lbs (1.85kg)
Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty: 3 years
627699907603
627699807606

Warranty:

3 Years