NTI splitmux-c5hdr-4lc Low-Cost HDMI Quad Screen Splitter/Multiviewer/Extender

$720.00
Unit price per

The SPLITMUX® Low-Cost HDMI Quad Screen Multiviewer allows you to simultaneously display real-time HDMI/DVI video from four different sources on a single monitor. It is capable of displaying the video sources in quad, PiP, or full screen mode. The audio/video output can be extended up to 250 feet away via a single CAT6/6a/7 cable.

Note: This device does not support HDCP.

Features:

Quad, Picture in Picture, and Full Screen display modes.
Independent video in to video out resolution.
Supported resolutions:
Input: HTDV resolutions to 1080p and computer resolutions to 1920x1200.
Output: 1080p, 1080i, 720p, 1024x768, 1360x768.
HDMI features supported:
Inputs: 24-, 30-, and 36-bit xvYCC, sRGB, and YCbCr.
Outputs: 24- and 30-bit sRGB.
Four-channel non-mixing stereo with 16-, 20-, or 24-bit uncompressed PCM audio.
Bandwidth up to 165 MHz.
Inputs: 2.25 Gbps
Output: 2.0625 Gbps
Fluid, real-time video performance with 60 frames per second (fps) in all four quadrants.
Switch audio independently of video from connected HDMI sources in Quad mode.
Any DVI source or display can be connected by using the DVI-HD-xx-MM cable (not included).
Use DVIA-HD-CNVTR-LC or DVI-HD-CNVTR DVI + Audio to HDMI Converters to pass and independently switch audio signals to the multiviewer.
Control the multiviewer through front panel buttons, IR remote, or Graphical User Interface (GUI) via RS232.
Bi-directional IR control from multiviewer and remote unit locations.
Cascade multiviewers to display video from any number of video sources on one screen.
Each unit in the cascade must be configured and controlled individually.
Cascaded outputs can be extended using the remote unit as long as the combined total CAT6/6a/7 cable length between all levels of the cascade does not exceed 250 feet.
Compatible with SPLITMUX-HD-4RT for cascade configurations.
Adjust output video brightness, contrast, color, and sharpness.
Supports simultaneous local and remote HDMI output.
Features coax SPDIF audio outputs at the multiviewer and receiver.
Built-in default EDID table.
Supported output resolutions can be selected.
ARC (Audio Return Channel) support at the receiver unit via coax SPDIF output for speakers.
Turn ARC on to play audio from an HDTV with ARC support to the connected speakers.
Turn ARC off to play audio from the multiviewer source to the connected speakers.

Specifications:

Inputs
Four female HDMI connectors.
One 3.5mm port for IR receiver.
One RS232 port for Graphical User Interface (GUI) control.
Supports digital HDMI devices, such as DVD/Blu-ray players, satellite receivers, and HDTV tuners.
A DVI source can be connected by using the DVI-HD-xx-MM cable (not included). The cable does not pass audio to the multiviewer.
Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer (see Compatible NTI Products below).
Outputs
One female HDMI connector for local display.
One RJ45 connector for CATx cable to remote unit.
One coax connector for local SPDIF audio.
Four 3.5mm ports for IR emitters.
Output resolutions: 1080p, 1080i, 720p, 1024x768, 1360x768.
A DVI display can be connected by using the DVI-HD-xx-MM cable (not included). The cable does not pass audio to the display.
Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer (see Compatible NTI Products below).
Power
100 to 240 VAC at 50 or 60 Hz via AC adapter.
Power consumption: 10W.
Dimensions
WxDxH (in): 9.84x4.65x1.26 (250x118x32 mm)
Environmental
Operating temperature: 32 to 104°F (0 to 40°C).
Storage temperature: -4 to 140°F (-20 to 60°C).
Operating and storage relative humidity: 20 to 90% non-condensing RH.
Regulatory Approvals
CE, FCC, RoHS
Compatible NTI Products
Combine NTI's multiviewers and video converters for cost-effective display configurations.
DVI-D to HDMI Single Link Interface Cable (DVI-HD-xx-MM).
The cable does not pass audio to the multiviewer.
HDMI Quad Screen Multiviewer (SPLITMUX-HD-4RT)
DVI + Stereo Audio to HDMI Converter
(DVIA-HD-CNVTR-LC)
DVI + Digital Audio to HDMI Converter
(DVI-HD-CNVTR)
Composite Video + Audio to HDMI Converter
(CVA-HD-LC)
VGA + Audio to HDMI Converter Cable
(VGAA-HD-ULC)
VGA/Component Video/HDMI Scaler/Converter
(PCHD-HDMI-SCALER)
Inputs
One RJ45 connector for CATx cable to multiviewer.
One 3.5mm port for IR receiver.
Outputs
One female HDMI connector for remote display.
One coax connector for remote SPDIF audio.
Supports ARC (Audio Return Channel)
One 3.5mm port for IR emitter.
Supports crisp and clear HDTV resolutions to 1080p and computer resolutions to 1920x1200.
A DVI display can be connected by using the DVI-HD-xx-MM cable (not included). The cable does not pass audio to the display.
Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer (see Compatible NTI Products below).
Power
100 to 240 VAC at 50 or 60 Hz via AC adapter.
Dimensions
WxDxH (in): 4.02x2.60x1.02 (102x66x26 mm)
Environmental
Operating temperature: 32 to 104°F (0 to 40°C).
Storage temperature: -4 to 140°F (-20 to 60°C).
Operating and storage relative humidity: 20 to 90% non-condensing RH.
Regulatory Approvals
CE, FCC, RoHS

Item Includes:

One HDMI Multiviewer
One remote unit
One 12V, 2.5A power supply
One 5V, 1A power supply
One IR remote
Five IR emitters
Two IR receivers
One 4.6Ft (1.4 m) RS232 cable
Wall mount brackets with screws
User manual