Quantum Data 780AH Video Generator/Analyzer with HDCP 2.2 Support

$5,043.00
Unit price per

The 780AH Video Generator/Analyzer from Quantum Data is a portable multimedia generator and analyzer that enables you to conduct quick verification tests of all your HDMI products-source, sinks, repeaters, distribution devices-on-site or in an R&D lab. The instrument's features a color touch screen display-4.3 inches at 480 x 272 resolution-for convenience in viewing the results of analysis tests such as Auxiliary Channel Analyzer traces.

The 780AH builds on the 780 test instrument and adds the following capabilities:

Test HDMI 2.0 with 300MHz HDMI Tx & Rx ports
HDCP 2.2 authentication
300MHz HDMI Tx & Rx ports
Test HDMI 2.0 4:2:0 pixel encoding and 21:9 formats
View full scaled captured video frames by panning - even 4K resolutions
Headphone jack for monitoring incoming LPCM audio
RS-232 port for command line control
Emulate HDMI 1.4 ARC Tx to test ARC Rx on A/V receiver testing HDMI SINK devices

Features:

HDMI Output Port
Pattern Testing including 3D and Deep Color
Up to 300MHz for testing on 4K-capable HDMI HDTVs
HDMI Input Port - Analysis of HDMI sources
Up to 300MHz for analysis of 4K-capable HDMI sources
HDMI 2.0 Feature Testing
Test HDMI 2.0 compliant 4K at 50/60Hz devices with 4:2:0 pixel encoding, 21:9 format timings (up to 300 MHz) and EDID verification.
HDMI 3D Pattern Generation
Test Side-by-Side, Top/Bottom and Frame Packing 3D format structures.
Analog Component Video Output
Pattern testing for analog component inputs on HDTVs up to 80MHz.
Large Format and Test Pattern Library
Offers large library of industry standard timing formats and test patterns including HDMI, CEA, VESA, SMPTE.
Custom Formats and Bitmap Patterns
Create custom formats. Import your bitmaps for pattern testing.
Test Pattern Scrolling
Animated test patterns for testing motion artifacts.
Licensed Bitmap Images (optional)
Image pattern packs: THX, China Res and ISF.
Multichannel Digital Audio
Verify audio-capable devices using multichannel audio over HDMI, SPDIF, and Optical outputs with sampling rates up to 192kHz. Test LPCM and Dolby and DTS compressed audio formats. Check HDMI ARC channel on A/V receivers.
Installer Test Utility
Verify sources, sinks, repeaters with "one button" Pass/fail tests.
HDCP Protocol Tests (part of Network Analyzer option)
Verify an HDMI display properly responds to HDCP content protection. HDCP 1.4 and NEW! HDCP 2.2 supported on both HDMI ports.
HDCP Source Test (part of Network Analyzer option)
Check HDMI HDCP 1.4 & NEW! 2.2 source devices.
EDID Verification (part of Network Analyzer option)
Verify an HDMI display's EDID for errors. View the display's entire EDID content. Compare two EDIDs. Run portions of the EDID compliance test.
HDMI Sink Emulator (part of Network Analyzer option)
Emulate an HDMI sink device to test EDID on HDMI source device; test a source response to a variety of stored EDIDs.
HDMI Source Video Testing
View the video timing data and video infoframe data from an HDMI source device including 3D metadata. View various data island packet contents.
HDMI Source Audio Testing (part of Network Analyzer option)
Verify incoming audio (format, sampling rate, bit depth) by viewing the decoded IEC audio headers, audio infoframes and channel status bits. Monitor audio through headphone jack.
HDMI Cable & Network Test (Cable & Link test option)
Prequalify or verify your HDMI cable and HDMI distribution network (extenders, splitters, switchers, etc) using a pseudo random noise test pattern or pixel error test with Frame Compare feature.
Aux Channel Analyzer (ACA option)
Monitor the CEC HDMI hot plug related events and DDC transactions, EDID and HDCP, either while emulating a known-good HDMI device or while passively monitoring between multiple HDMI connected devices.
Note: Passive monitoring requires optional hardware configuration.
Color Touch Screen
Large user friendly color touch screen enables you to operate the instrument and view incoming video and metadata
Battery Powered
Rechargeable batteries provide untethered operation when needed. Can also be powered from AC through power adapter.
Command Line Control
Run automated tests thru command line interface via USB or RS-232.

Specifications:

Video & Audio
HDMI Version: HDMI 1.4a and 2.0 (partial)
HDMI Connector: (1) Type A Tx; (1) Type A Rx
HDMI I/F Protocols: HDMI, DVI
HDMI Video Colorimetry: ITU-R BT.601-5, ITU-R BT.709-5
HDMI Max Pixel Rate: 300MHz (3.00Gbps/channel TMDS rate)
HDMI Color Depths: 8, 10, 12 bits/component
HDMI Video Encoding: RGB, YCbCr
HDMI Video Sampling: 4:4:4, 4:2:2, 4:2:0 per HDMI 2.0
HDMI HDCP: Versions 1.4 and 2.2
HDMI Audio - Formats: LPCM, Dolby (DD, DD+ TrueHD), DTS (ES, HD, Master Audio)
Audio LPCM Settings: Sampling rates (32.0 - 192kHz) Bit per sample (16, 20, 24)
Analog Output: Connector: HD15 Video: Max Pixel Rate: 80MHz; RGB & YPbPr
Digital Audio Outputs: SPDIF (RCA); Optical (JIS FOS)
General
Power: CD 6AA NiMh batteries; 2 hours use between charges. 30 hours minimum charge.
AC Charger/Converter 100-120 VAC, 47-63Hz
Weight: 3.25 LBS; 1.47 Kg
Height: 2.7inches (6.98 cm)
Width: 9.75 inches (24.76 cm)
Depth: 6 inches (15.24 cm)
Embedded Display: 480 (H) x 272 (V) resolution; 24 bit RGB color.
Command Line Control USB, RS-232
Environmental: Operating Temp: - 32 to 104 (F) - 0 to 40 (C)

Item Includes:

780AH Handheld Test Instrument for HDMI.
12V DC (1.5 amp) Power Supply / Adapter / Charger.
Line cord for 12V Power Supply.
HDMI-to-HDMI Type A cable.
Three (3) Ft VGA to (3) RCA adaptor cable.
Six (6) Ft USB cable.
Quick Start Guide.