Samson MXS3000 Professional Power Amplifier
Pro Power
Samson's MXS3000 Professional Power Amplifier is designed to deliver premium power in any sound reinforcement application that requires exceptional sound and high wattage support. Astonishingly efficient, the MXS3000 combines easy operation, comprehensive protection and impressive output levels into a small, lightweight design perfect for any live performance or installation setup.
With a dual rack space, Class H design, the MXS3000 produces 1,550 watts of stereo power at 4 ohms and 4,600 watts of bridged mono power at 4 ohms. The power amp employs an intelligent switch mode power supply design that provides optimal power distribution and maximum efficiency by continuously monitoring the signal level. This smart distribution eliminates excess heat or wasted energy. The MXS3000 also features low noise fans to ensure its high-grade power transformer has continuous access to cool air.
The MXS3000 sports a sleek, user-friendly front-end design with detented level controls for each channel, as well as Signal, 10dB and Peak level LEDs for optimal use on dark stages. It offers additional LEDs to indicate your current operating mode and filter settings. The MXS3000 offers XLR and 1/4" inputs, as well as Binding Post and Speakon outputs. In addition, the power amp's 3-position Mode selector switch allows for easy toggling between Mono, Stereo and Bridged Mono modes. The MXS3000 also has a 3-position Filter (120Hz, Full, 28Hz) filter selector switch for optimizing the power amps to your specific setup demands.
Designed to support efficient and safe performance, Samson's high-powered MXS3000 offers pro-level power solutions for live music venues, houses of worship and health clubs, as well as for mobile DJs, outdoor parties and touring musicians.
Features:
- Premium performance, high headroom power amplifier
- Class H amplifier technology with switch mode power supply for optimal power distribution
- 1,550 watts per side at 4 ohms, 4,600 watts bridged mono at 4 ohms
- 950 watts per side at 8 ohms, 3,100 watts bridged mono at 8 ohms
- Built-in limiter provides peak power delivery while minimizing distortion
- Extensive 4-point protection circuitry (Short Circuit, DC Output, Over Current, Thermal)
- Front Panel LED indicators (Signal, 10dB, Peak)
- 3-position Mode (Mono, Stereo, Bridged Mono) and Filter (28Hz, Full, 120Hz) selector switches
- XLR and 1/4" inputs
- Binding Post and Speakon outputs
- Onboard cooling fans
Specifications:
- Rated Output Power Stereo both channel driven
- 8 ohms = 950W
- 4 ohms = 1550W
- 2 ohms = 1850W
Rated Output Power Bridged mono - 8 ohms = 3100W
- 4 ohms = 4600W
Current Consumption (115VAC/230VAC) - @ 1/8 rated power 4ohms = 670W
- @1/3 rated power 4ohms = 1400W
- @ rated power 4ohms, max. = 2600W
Distortion (typical @4 ohms) - 20Hz-20kHz,10dB below rated power: 0.003%
- 1kHz,rated power: 0.007%
Connectors (each channel) - Inputs: 3-Pin XLR and 1/4" TRS, balanced
- Outputs: Binding post and Speakon
Frequency Response @ 8ohms 1Watt: 20Hz to 20KHz,+0/-0.2dB, 4Hz to 50kHz ±3dB - Damping Factor (400Hz): >300
- Input Impedance: 20K balanced/Unbalanced 10K
- Input Clipping: 0dB
- Cooling: Dual Continuously variable speed fan, back-to-front air flow
- Signal to Noise Ratio (20Hz-20k): >103dB
- Distortion (SMPTE-IM): 0.02%
- Input sensitivity @ 8ohms Voltage Gain: 0dBu
- Voltage Gain: @ 8ohms: 38dB
- Output Circuitry: Class H
- Controls: Power switch, CH A & CH B volume, Parallel/Stereo/Bridge switch, Filter switch
- Indicators: Signal, -20dB, -10dB, limit, Thermal
- Protection: Amplifier protection: Thermal, Short, DC output, mismatched loads, On/off muting and Delay, Locked the power amplifiers
- Dimensions (LxWxH): 19" x 14.7" x 3.5"
- Net Weight: 21.6 lb
