Thor H-1HDMI-QAM-IP 1 Channel HDMI Digital TV Encoder Modulator with IPTV Server

$2,489.00
Unit price per

Real time hardware video encoder with integrated modulator and IPTV server. An internal web server provides access to all settings through any standard browser. All settings are also available from the front panel LCD. Converts uncompressed HD video to MPEG-2 or H.264 transport streams on three outputs. This system generates Digital TV programs on any channel or modulation standard. Supports QAM, 8VSB, DVB-C, DVB-T, and ISDB-T through firmware updates. RF level is adjustable from 15-45 dBmV. Outputs UDP network transport streams to feed IPTV systems and Content Delivery Networks (CDN). Includes integrated DVB-ASI multiplexer for adding programs to output; or multiplexing additional programs in DVB-ASI format. Can be used as a ?stand alone? ASI multiplexer with Add/Drop capabilities. Provides configurable values for Electronic Programming Guide, and all transport stream PID?s can be set independently.

Thor part number H-1HDMI-QAM-IP is a standard CM2 QAM-IP Chassis equipped with a 1 Channel HDMI encoder card. This card has a second HDMI input for a redundant video source. In the event of video failure on the primary input, the unit will automatically switch to the backup source. This card supports native HD resolutions at 720i, 720p, 1080i, 1080p. Frame rates up to 60fps are supported for all video resolutions. The encoder parameters can be set through the web interface or via the front panel. For the video codec, both MPEG-2 and H.264 can be selected, and the encoding rate is adjustable from 1-20 Mbps. The audio encoding is through embedded HDMI audio input, and the encoding rate is adjustable from 64-320 kbps. Thor also carries external audio embedded for use with external analog or digital audio sources if embedded HDMI audio is not available. Other available settings are Program Name, Service ID, PMT PID, Video PID, Audio PID, and PCR PID.

Features:

Hardware Encoder / Digital Modulator / IP Server / ASI Multiplexer
Modulation Support for QAM, 8VSB, DVB-C, DVB-T, or ISDB via Firmware
Separate management Network Port with dedicated web server
Encodes in either MPEG-2 or H.264, each channel independently configured
Encodes HD Video in real time with CATV, IPVT, and DVB-ASI outputs.

Specifications:

Input: 1x HDMI 1.4a with Primary + Redundant, Auto Switching
Supported Resolutions: 720x480i60/59.94, 720x576i50, 1280x720p60/59.94, 1280x720p50, 1920x1080i60/59.94, 1920x1080i50, 1920x1080p60/59.94, 1920x1080p50
Video Codecs: MPEG-2 HD, H.264 HD
Audio Codecs: MPEG-1 Layer II, MPEG-2 AAC, MPEG-4 AAC
Audio Sample Rate: 48 kHz
Audio Bit Rates: 64 kbps, 96 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps
Modulation Standards: QAM - J.83A, J.83B, J.83C, ATSC - 8VSB, DVB-C, DVB-T, ISDB-T
RF Frequency Range: 30-960 MHz 1 KHz Step
RF Power Level: 15-45 dBmV
DVB-ASI Output: BNC Connector 1-60 Mbps
DVB-ASI Input: BNC Connector: 1-30 Mbps, Programs Selected by PID, Programs Muxed to all Outputs
IPTV Output: MPEG-TS MPTS over UDP both Unicast and Multicast Supported
Power Input: 100-240 VAC Auto Switching 20 W
Dimensions: 482 x 300 x 44 mm
Weight: 4.5 kg
Operating Temperature: 0 - 45 C

Includes:

Encoder / Modulator / IPTV Server
US Standard 120 VAC Power Cable
Video Cable
User Manual