Vaddio 999-6956-001 WallVIEW HD-20 DVI/HDMI - International
The WallVIEW HD-20 is built around the ClearVIEW HD-20 high definition pan/tilt/zoom camera, with an impressive 20x Optical hyperzoom lens and imaging sensor technology comparable to a 3-Chip camera.
The HD-20 is built around a 6.49mm diagonal (1/3-Type) Sony Exmor sensor, which adopts the "Column-Parallel A/D Conversion Technique" to create images containing more detail than ever before. It combines the speed of the 3.27 megapixel CMOS sensor with the advanced quality image sensor technologies accumulated through the development of CCD sensors. With a LUX rating of 1.6, the HD-20 achieves improved picture quality in very low light environments resulting in a truly accurate and clean HD video image.
The WallVIEW HD-20 DVI/HDMI delivers simultaneous analog component video (YPbPr) and digital video (DVI-D or HDMI) outputs on separate connectors, ideal for multiple monitoring and large projection systems.
Features:
- True Native HD 6.49mm diagonal (1/3-Type) high-speed CMOS image sensor
- 20x Optical hyperzoom lens
- 3.27 Megapixels
- Component HD and HDMI outputs (1080p, 1080i or 720p / 59.94Hz and 60Hz)
- Quick-Connect DVI/HDMI up to 100 feet over a single Cat. 5 cable
- Heavy-duty wall mount bracket and power supply
- Daisy Chain Emulation for multiple videoconferencing codec applications
Specifications:
- Image Device 6.49mm diagonal (1/2.8 Type) Exmor High-speed CMOS Image Sensor
- Picture Elements 3.27M pixels (Effective)
- HD Resolutions 1080i/59.94/60, 1080/50i, 720p/59.94/60, 720/50p, 1080/30p and 1080/25p (SD Resolutions not Supported)
- Color Space: The Recessed Color Space Conversion Switch enables the use of either HDMI YCbCr or DVI-D
- sRGB (RGBHV) color space for added flexibility with adapter cables.
- Lens 20x Optical Zoom, 11-Element HiLD. (High Index Low Dispersion) Glass
- Focal Length F=4.7mm wide end to 94mm tele end
- Horizontal Viewing
- Angle (16:9 format)
- 1080i Mode: 2.9?X tele end to 55.2?X wide end
- 720p Mode: 1.93?X tele end to 36.8?X wide end (windowed - not scaled)
- Invertible Yes - With No Frame Delay
- Video S/N Ratio >50 dB
- Minimum Illumination 1.6 LUX (F1.6, 50IRE)
- Serial Control Protocol RS-232 (Modified VISCA)
- Min. Object Distance Wide End: .01m wide end, Tele end: 1.0m
- Pan Range +170 degrees to -170 degrees
- Tilt Range +90 degrees to -30 degrees
- HD Video Select 16-Position Rotary Switch: Used to set HD Video Resolution Output
- Camera Settings 10-Position Dip Switch: Settings for IR Select, Baud Rate 9600, Image Flip, Unpublished
- Functions
- Preset Positions 16 (internal), 6 recalled via IR Remote
- Dimensions/Weight 7.81?" (198.37mm) x 6.67?" (169.42mm) x 7.057?" (179.25. mm), 5.61 lbs. (2.54011744 kg.)
- Quick-Connect DVI/HDMI SR (Short Range) Interface
- Connectors ,h Power Connector: 5.5mm OD, 2.5mm ID coaxial connector
- ,h RJ-45: Four (4) Control IN, Control OUT, Daisy Chain OUT, EZCamera Power Video Port
- ,h Video Output: DE-15 connector for HD Analog Component (Y,PB,PR) video only (No SD Support)
- ,h IR Output: Transmits modulated or non-modulated IR signals received from the HD-20 IR receiver
- ,h Video Outputs: Video Outputs: DVI-D (Female - Single Link) or HDMI with adapter cable (using the
- Recessed Color Space Conversion Switch) , DE-15F (High Density D-Sub 15-Pin F) for HD YPbPr
- Cat-5e Cable Distance Up to 100??(30.5m)
- Power Supply 24 VDC, 2 Amp
- Dimensions / Weight 1.6?" (40.64mm ) H x 8?" (203.2mm) W x 6.751?" (171.45mm) D, .-Rack Size / 1.21 lbs.
- (0.548846804 kg)
- Accessory Options 1-RU Rack Mount Panel for two (2) units (side by side): P/N: 998-6000-003
- 1m (3.3?? DVI-D Male to HDMI Male P/N: 440-5643-001
- 3m (10?? DVI-D Male to HDMI Male P/N: 440-5643-003
- CONCEAL Wall Mounting System for Vaddio ClearVIEW HD-20
- Dimensions 5.125?" H x 6.75?" W x 10?" D (13 cm x 17.15 cm x 25.4 cm)
- Weight Approx. 2.4 lbs. (1.1kg)
