Ward-Beck openGear D6202A-RM complete with Rear Terminal Module T6303A
The D6202A+RM comprises a D6202A 1 x 8 digital audio distribution amplifier (designed specifically for use in 110 Ohm, balanced installations) and a T6303A rear module. The D6202A has one input and can provide up to eight outputs of the input signal. Features such as cable equalization and data reclocking allow the unit to reliably recover the incoming digital signal. Lock, No Lock and EQ LED indicators are all visible from the front edge of the card. Located on the front edge of the card is the EQ insert switch, which automatically activates the cable equalization without having to set any jumpers. The D6202A is capable of handling all AES/EBU sampling frequencies up to 192 kHz. The D6202A is housed in the openGear DFR8300 series frames and can be configured and monitored through DashBoard.
Features:
- Cable equalization and data reclocking on the incoming AES/EBU signal.
- Supports audio sampling frequencies from 30kHz to 192kHz.
- EQ insert switch automatically activates the cable equalization
- designed for use in 110 Ohm, balanced, installations
- one input can provide up to eight outputs when the T6303A rear module installed
- Status Tallies - Lock, No Lock and EQ on front edge of the card
- works with dashboard remote control and monitoring software
- Higher density (1 x4 DA) possible with up to 20 cards in a DFR-8321 frame when used with T6403A.
Specifications:
- Digital Input
- Input Voltage - 0.2 to7V p-p
- Input Impedance - 110 Ohm
- Digital Output
- Output Level - 2.5V p-p nominal
- Output Impedance - 110 Ohm unbalanced
- Performance
- Equalization - 200M (650ft) over 110 Ohm twisted-pair cable?
- Resolution - 24 Bit
- Jitter - Less than 5 ns
- Sampling Frequency Rate - 30 kHz to 192 kHz
- General
- Power Requirements - +12 V @ 330mA
- Weight - 0.115 kg (0.252 lbs)
- Dimensions - 3.025" high x 12.800" deep
Includes:
