Ward-Beck openGear D6507A DolbyE/AC3 Decoder Module

$2,849.27
Unit price per

The D6207A is a DolbyE/AC3 decoder with Sample Rate Conversion (SRC) designed for broadcast use. It takes a Dolby encoded signal and extracts the discrete surround sound channels and presents them as AES pairs on a T6305A rear module. It also extracts the Metadata embedded in the Dolby signal and presents this on an output terminal on the rear modulet.
The D6207A card accepts an AES signal at its input. The signal may be Dolby E or AC3 encoded or PCM.
If the signal is Dolby E the card will output the decoded AES pairs as (L,R) (C,LFE) (Ls,Rs) (SAP, if present) (Lo,Ro or Lt,Rt, depending on selection) and Metadata.
If the signal is AC3 the card will output the decoded AES pairs as (L,R) (C,LFE) (Ls,Rs) (Lo,Ro or Lt,Rt, depending on selection). AC3 does not contain Metadata.
If the input is PCM the card will provide an output on (L,R) and (Lo, Ro/Lt, Rt) as well as on the input loop through. All other outputs will be muted.
The D6207A supports audio sampling frequencies from 32kHz to 48 kHz. The D6207A is housed in the openGear DFR8300 series frames.

Features:

DolbyE/AC3 decoder with SRC
Discrete channels are extracted from Dolby encoded signals
discrete audio channels are AES signal streams
extracts the Metadata embedded in Dolby E signals
input signals may be Dolby E, Dolby AC3 or PCM.
Dolby E extracted audio - (L,R) (C,LFE) (Ls,Rs) (SAP, if present) (Lo,Ro or Lt,Rt, depending on selection) and Metadata.
AC3 extracted audio - (L,R) (C,LFE) (Ls,Rs) (Lo,Ro or Lt,Rt, depending on selection). (AC3 does not contain Metadata.)
PCM audio will provide an output on (L,R) and (Lo, Ro/Lt, Rt) as well as on the input loop all other outputs will be muted
supports audio sampling frequencies from 32kHz to 48 kHz

Specifications:

Digital Input
Input Voltage - 0.2 to7 Vp-p
Input Impedance - 75 Ohm
Digital Output
Output Level - 1 Vp-p nominal
Output Impedance - 75 Ohm unbalanced
Metadata - 115kbps, 3Vp-p differential
Performance
Resolution - 24 Bit
Jitter - Less than 5 ns
Sampling Frequency Rate - 32 kHz to 48 kHz
General
Power Requirements - +12 V @ 330mA
Weight - 0.115 kg (0.252 lbs)
Dimensions - 3.025" high x 12.800" deep

Includes: